With your size in both length and girth, the Hercules, 30x, or 30x Extreme, will do. All three models will accommodate up to 8" in length and 6.5" in expanded girth comfortablely. If you are looking to go past 8" then the 40x models is the way to go. I'd go with the 30x first. Then move up to the 40x model.
REP Support for Bathpump.com - Q & A
- Thread starter Harrison BP Rep
- Start date
With your size in both length and girth, the Hercules, 30x, or 30x Extreme, will do. All three models will accommodate up to 8" in length and 6.5" in expanded girth comfortablely. If you are looking to go past 8" then the 40x models is the way to go. I'd go with the 30x first. Then move up to the 40x model.
Hi, I have had the X40 Extreme for 14 months, started at just under 20cm, now approaching the opaque area towards the valve. Any idea what the measurement is here please? How safe is it to continue?
As an update, as soon as I press the bathmate down and achieve a good seal air immediately starts coming in through the valve, rendering it completely unusable; the valve is almost certainly faulty, and has been allowing air in throughout my sessions. What are some steps to fix this, and is it possible to be shipped a replacement valve/bathmate?
Once again, thanks a lot, and I hope you feel better soon.
thank you for the reply
im not looking to get above 8" to be honest
i thought the 30x or 30x extreme would be the best ones but just wanted clarification im not looking to get one at the moment due to not affording it at the moment plus i need to get a consistent routine going before moving onto it
have been doing the jp90 on and off since march but living at home i difficult to get privacy however im hoping to start it properly from jan 1st
Hello everyone! And welcome Harrison to the gym! I've been a pegym lurker for well over a year, and I've done manuel pe on and off for abooout 2 years. I finally decided to create an acct here and comment lol.
Anyway, I'm excited to say that I've just ordered the x40 on bathpump.com. I also purchased the 2 yr warranty with that. Size wise I could start with the x30 (apx 7.2-7.5 x 5.0 ish), however there are 3 factors which made me decide to go with the x40.
1) I've got a good 30, possibly 40 lbs of body fat to lose. I'm not a slob, quite muscular under the fat (currently 230 lbs) haha, lift heay at the gym etc, but getting the diet in check. So the fat pad may reveal a lil more length. Also my EQ should see a wonderful spike.
2) My end goals 9.0 x 6.0 maybe 6.5.
3) I would rather make one bathmate purchase
Ok, long post, gonna end it these. Take care guys and gals!
Anyway, I'm excited to say that I've just ordered the x40 on bathpump.com. I also purchased the 2 yr warranty with that. Size wise I could start with the x30 (apx 7.2-7.5 x 5.0 ish), however there are 3 factors which made me decide to go with the x40.
1) I've got a good 30, possibly 40 lbs of body fat to lose. I'm not a slob, quite muscular under the fat (currently 230 lbs) haha, lift heay at the gym etc, but getting the diet in check. So the fat pad may reveal a lil more length. Also my EQ should see a wonderful spike.
2) My end goals 9.0 x 6.0 maybe 6.5.
3) I would rather make one bathmate purchase
Ok, long post, gonna end it these. Take care guys and gals!
Hi Harrison,
Could you take a look at this thread please:
https://www.pegym.com/forums/penis-...-re-assembling-bathmate-valve.html#post984092
I'm having trouble re-assembling my hydromax x40's valve after cleaning.
Thanks,
Zeds
Could you take a look at this thread please:
https://www.pegym.com/forums/penis-...-re-assembling-bathmate-valve.html#post984092
I'm having trouble re-assembling my hydromax x40's valve after cleaning.
Thanks,
Zeds
Hello fellow PEers,
My name is Lucas and I work with Harrison for Bathpump.com. Unfortunately Harrison has been having some medical issues and has been away for just over a week. We are hoping he has a speedy recovery and will be back with us soon!
Until then I will happily be answering any questions and concerns had by everyone on here. Like Harrison, I have been PEing for quite a few years and it seems that every week that passes I become more excited by the gains, life style change and success stories of many others.
I first want to take a moment to thank Workin_4_it and aplay69 for helping us by giving some great answers over the course of the last couple of weeks. They are greatly appreciated and have been very helpful.
If anyone still has any questions they feel weren't answered, feel free to ask! You are also welcome to PM me at anytime.
Thank you for welcoming me into your community!
Have a great day with great gains!
My name is Lucas and I work with Harrison for Bathpump.com. Unfortunately Harrison has been having some medical issues and has been away for just over a week. We are hoping he has a speedy recovery and will be back with us soon!
Until then I will happily be answering any questions and concerns had by everyone on here. Like Harrison, I have been PEing for quite a few years and it seems that every week that passes I become more excited by the gains, life style change and success stories of many others.
I first want to take a moment to thank Workin_4_it and aplay69 for helping us by giving some great answers over the course of the last couple of weeks. They are greatly appreciated and have been very helpful.
If anyone still has any questions they feel weren't answered, feel free to ask! You are also welcome to PM me at anytime.
Thank you for welcoming me into your community!
Have a great day with great gains!
- Joined
- Mar 18, 2011
- Messages
- 30,378
- Reaction score
- 3,466
- Points
- 133
- Location
- An inch and 1/2 deeper than before
Welcome Lucas!
Thanks for letting us know about Harrison. Send our regards and well wishes to him from us at the Gym. We hope he feels better soon.
Good to have you with us, we appreciate the advice and help.
And you're welcome, glad I could be of assistance.
Thanks for letting us know about Harrison. Send our regards and well wishes to him from us at the Gym. We hope he feels better soon.
Good to have you with us, we appreciate the advice and help.
And you're welcome, glad I could be of assistance.
Hey OnMyWayThere,
I am sorry to hear about the troubles you have been having with your X30, it can be a pain when air gets into the pump.
Here are a couple of tips that I would suggest you try to see if the valve truly is broken
1) I would make sure that your pubic hair is trimmed and you getting good suction at the base.
2) The valve on the X30s and X40s can become distorted if left in the locking position. When not in use, the valve should always be left in the neutral position. To fix this - allow valve to sit in neutral position for 5-10 minutes and it should form back to its original shape.
3) Always make sure to switch the valve to the locked position when the desired suction has been achieved, to hold in the level of pressure.
If you have tried these, then I will happily send you a replacement valve. Feel free to PM me!
Thanks,
Lucas
I am sorry to hear about the troubles you have been having with your X30, it can be a pain when air gets into the pump.
Here are a couple of tips that I would suggest you try to see if the valve truly is broken
1) I would make sure that your pubic hair is trimmed and you getting good suction at the base.
2) The valve on the X30s and X40s can become distorted if left in the locking position. When not in use, the valve should always be left in the neutral position. To fix this - allow valve to sit in neutral position for 5-10 minutes and it should form back to its original shape.
3) Always make sure to switch the valve to the locked position when the desired suction has been achieved, to hold in the level of pressure.
If you have tried these, then I will happily send you a replacement valve. Feel free to PM me!
Thanks,
Lucas
Hello Dickie,
I think getting a Bathmate would be a great way to start the new year! There is nothing wrong with asking for clarification, The X30 or X30 extreme would both fit your current size as stated here! I know you stated you wouldn't want to get above 8" in BPEL but I don't know how your feelings are about getting about 6" MEG, if either of those are a possibility then it might be worth looking into the X40.
The X30 would be a great fit right now though!
Thanks,
Lucas
I think getting a Bathmate would be a great way to start the new year! There is nothing wrong with asking for clarification, The X30 or X30 extreme would both fit your current size as stated here! I know you stated you wouldn't want to get above 8" in BPEL but I don't know how your feelings are about getting about 6" MEG, if either of those are a possibility then it might be worth looking into the X40.
The X30 would be a great fit right now though!
Thanks,
Lucas
Hello jbeyesonthesize,
Welcome out of the lurking stage, PEGym has a great community and I know they will happily welcome you in with open arms.
I see you have carefully thought about this purchase and I think you will be very happy with your decision! I am glad you took advantage of the 2 year warranty, that is a new option that we just recently started offering and it is a raging success!
If you have any questions please feel free to ask. I look forward to reading about your success and the journey to reaching your goals!
Thanks,
Lucas
Welcome out of the lurking stage, PEGym has a great community and I know they will happily welcome you in with open arms.
I see you have carefully thought about this purchase and I think you will be very happy with your decision! I am glad you took advantage of the 2 year warranty, that is a new option that we just recently started offering and it is a raging success!
If you have any questions please feel free to ask. I look forward to reading about your success and the journey to reaching your goals!
Thanks,
Lucas
Hello Zeds,
I am sorry to hear about the troubles you are having after just trying to simply clean your pump! This can be rather aggravating.
I notice Working_4_it has come up with some great suggestions and I am curious to how your progress has come with those?
- Did you make sure that you are getting a proper seal with the black grommet?
- Looking at the pictures it does look like possibly the valve may a little dis-formed, if you believe this is so after further inspection please PM me and I will happily send you another one.
If you have tried both of those options and feel that you are still running into problems let me know
Thanks,
Lucas
Hello Lucas, we're glad to have you aboard.
I have a question I always wanted to ask, but so far I was too shy to raise my hand and pointing finger .
How comes there is still no way to measure pressure within the bathmate? Is there any plans to change this in the near future?
I have a question I always wanted to ask, but so far I was too shy to raise my hand and pointing finger .
How comes there is still no way to measure pressure within the bathmate? Is there any plans to change this in the near future?
Last edited:
Hello Popol15169,
That is a very good question, I know the manufactures are always testing new ideas and ways to enhance the pumps but as of now they have not released any information about adding a pressure gauge. As always, pressure gauge or not the biggest indicator of too much pressure is to listen to the signs your penis gives off. You never want to feel any pain at all, this should be a pleasurable experience not a negative one.
Thanks,
Lucas
burtybasset
Retired Moderator, Member of the Month May 2014,
Welcome to the gym Lucas!
I have read in one of the threads about one of our members gaining primarily length with the bathmate. Is there one particular model, or technique for using the bathmate that makes it more length focused than girth? does this just depend on the person/body type??
If it is possible to gain length and not girth with it, it might be something I would consider buying. Also what model would best suit a 6.5" base girth by 7" length?
Thank you.
P.S. Wish Harrison well from me too! Thanks!
I have read in one of the threads about one of our members gaining primarily length with the bathmate. Is there one particular model, or technique for using the bathmate that makes it more length focused than girth? does this just depend on the person/body type??
If it is possible to gain length and not girth with it, it might be something I would consider buying. Also what model would best suit a 6.5" base girth by 7" length?
Thank you.
P.S. Wish Harrison well from me too! Thanks!
I'll let Lucas have the last word, but from what heard, a narrow and longer tube should work on length.
Hello burtybasset,
Thank you for welcoming me into the community, we appreciate everyone's warm wishes for Harrison.
After reading your size I can see why your primary focus is on length! There is no Bathmate that focuses primarily on length, they focus on gaining both girth and length. When I am focused on gaining majority length opposed to girth - I will then use the Bathmate in conjunction with a great stretching routine, which I will happily give you if you'd like.
Here is a link to our model guide. I would recommend the X40 for your size.
Thank you,
Lucas
burtybasset
Retired Moderator, Member of the Month May 2014,
