REP Support for Bathpump.com - Q & A

[Big Al]

I would appreciate any response!

I got the hydro 7, I am currently 6.9” however when I pump I can’t get more than 4.5” - 5.0” without the pressure seeming too much.

Everyone’s talking hg, I don’t have any way of measuring pressure except for the length?

The manual says to pump flacid however everyone seems to be pumping 90% hard? So that’s what I’ve been doing.

Is there a guideline anyone could please recommend for pressure? Shall I try and increase length by 0.5 each week until I reach my current length? I have the cushion inserted (It came like that?) does that make shy difference?

Thank you in advance 

The cushion will automatically add a buffer between your penis and the device- creating a small negative length discrepancy.

Are you entering the device with a full erection?

 

[Prosperous]

Thank you for your response!
Yes, I am entering the device completely erect! I’m only reaching 4.5” on the ruler there but feels like my penis is going to explode at anymore pressure.

I’m 6’9” length 5.75” Girth and am only reaching that, should I be going in erect or flaccid? My research on these forums and others has showed me most people are receiving the best gains pumping erect and having an all day pump that day-next.

I’ve also see people with only 6.5” penis hitting the 7 mark? I’m only just reaching 4.5 before I can’t handle the pressure.

Thanks again in advance!

 

[Walter BP Rep]

The cushion will automatically add a buffer between your penis and the device- creating a small negative length discrepancy.

Are you entering the device with a full erection?

Thank you Al for advising him.

 

[Big Al]

Thank you Al for advising him.

You're most welcome!

 

[Prosperous]

Thank you for your response!
Yes, I am entering the device completely erect! I’m only reaching 4.5” on the ruler there but feels like my penis is going to explode at anymore pressure.

I’m 6’9” length 5.75” Girth and am only reaching that, should I be going in erect or flaccid? My research on these forums and others has showed me most people are receiving the best gains pumping erect and having an all day pump that day-next.

I’ve also see people with only 6.5” penis hitting the 7 mark? I’m only just reaching 4.5 before I can’t handle the pressure.

Thanks again in advance?

 

[Walter BP Rep]

Thank you for your response!
Yes, I am entering the device completely erect! I’m only reaching 4.5” on the ruler there but feels like my penis is going to explode at anymore pressure.

I’m 6’9” length 5.75” Girth and am only reaching that, should I be going in erect or flaccid? My research on these forums and others has showed me most people are receiving the best gains pumping erect and having an all day pump that day-next.

I’ve also see people with only 6.5” penis hitting the 7 mark? I’m only just reaching 4.5 before I can’t handle the pressure.

Thanks again in advance?

If your penis is erect inside the device it should read close to your length even if you're using a comfort pad. Is your penis very curved?

 

[jackflag]

Does anyone have experience with blood blisters forming on the glans during a session?

I had two form, and both popped, and now the skin looks raw where they were. A little scary.

 

[Walter BP Rep]

Does anyone have experience with blood blisters forming on the glans during a session?

I had two form, and both popped, and now the skin looks raw where they were. A little scary.

This is not normal. How much time are you in the pump for and are you using a lot of pressure?

 

[jackflag]

This is not normal. How much time are you in the pump for and are you using a lot of pressure?

Usually around 20 minutes in the pump. Pressure is up there, but i've been doing it for over a year so it doesn't bother me.

 

[Big Al]

Usually around 20 minutes in the pump. Pressure is up there, but i've been doing it for over a year so it doesn't bother me.

Have you been free of issues until recently? If so, what changes did you make in your training which resulted in the side effects?

Answering for Walter who's on vacation

 

[jackflag]

Have you been free of issues until recently? If so, what changes did you make in your training which resulted in the side effects?

Answering for Walter who's on vacation

Thanks man, I appreciate it.

I had been pumping for around a year, built up to around 20-25 minutes a session. I started getting some blood leaking out of the head a little during some sessions, but nothing too serious. I just eased up on the pressure. Then one day I got a big blood boil/blister on the head. I popped it, and then scraped the loose skin left from it off. Which left the raw flesh underneath exposed.

Obviously I freaked out. I took about a month off from pumping to try and let the skin grow completely back. It seemed to have grown back after a month, so I did a pumping session. This time, I eased back on the pressure a little bit from what I had been doing before. Still, two blood blisters/boils/sacs formed on the head. I popped them both as neither had gone down after a couple hours. Now the raw skin on the head is exposed on both sides and i'm waiting for the skin to grow back.

Really frustrating and disheartening.

 

[Alex1988]

Hey jackflag,

which bathmate are you using a normal one or a xtreme version with pumpball?

It's easy to overpump with the xtreme but with a normal bathmate blisters/blood blisters should not happen at 15-20 mins.

 

[Big Al]

Thanks man, I appreciate it.

I had been pumping for around a year, built up to around 20-25 minutes a session. I started getting some blood leaking out of the head a little during some sessions, but nothing too serious. I just eased up on the pressure. Then one day I got a big blood boil/blister on the head. I popped it, and then scraped the loose skin left from it off. Which left the raw flesh underneath exposed.

Obviously I freaked out. I took about a month off from pumping to try and let the skin grow completely back. It seemed to have grown back after a month, so I did a pumping session. This time, I eased back on the pressure a little bit from what I had been doing before. Still, two blood blisters/boils/sacs formed on the head. I popped them both as neither had gone down after a couple hours. Now the raw skin on the head is exposed on both sides and i'm waiting for the skin to grow back.

Really frustrating and disheartening.

You'll need extended time away from pumping. If you decide to return to it, you'll need to a use a more graduated approach to time and pressure.

 

[jackflag]

You'll need extended time away from pumping. If you decide to return to it, you'll need to a use a more graduated approach to time and pressure.

Yeah man. It sucks, but I think you're right. I think i'll stay away until September, and then come back with much less time.

 

[Big Al]

Yeah man. It sucks, but I think you're right. I think i'll stay away until September, and then come back with much less time.

Good luck, and please keep us posted.

 

[boners]

Thanks man, I appreciate it.

I had been pumping for around a year, built up to around 20-25 minutes a session. I started getting some blood leaking out of the head a little during some sessions, but nothing too serious. I just eased up on the pressure. Then one day I got a big blood boil/blister on the head. I popped it, and then scraped the loose skin left from it off. Which left the raw flesh underneath exposed.

Obviously I freaked out. I took about a month off from pumping to try and let the skin grow completely back. It seemed to have grown back after a month, so I did a pumping session. This time, I eased back on the pressure a little bit from what I had been doing before. Still, two blood blisters/boils/sacs formed on the head. I popped them both as neither had gone down after a couple hours. Now the raw skin on the head is exposed on both sides and i'm waiting for the skin to grow back.

Really frustrating and disheartening.

"I started getting some blood leaking out of the head a little during some sessions, but nothing too serious."

No offence dude but that sounds pretty serious, I would have stopped or at least taken a long break immediately. Good luck with recovery and take it easy from now on!

 

[Kazza98]

Hey guys I’m having trouble creating and keeping pressure with my bathmate. I’m often unable to get a good seal and even when I do manage to finally get some pressure going it’s often short lived. After filling the pump and inserting my penis, I then open the valve press it against me, release and then close the valve. Is this correct? Are there any tips on getting better pressure or a good seal? Any information would be much appreciated, thanks.

 

[Alex1988]

Hey guys I’m having trouble creating and keeping pressure with my bathmate. I’m often unable to get a good seal and even when I do manage to finally get some pressure going it’s often short lived. After filling the pump and inserting my penis, I then open the valve press it against me, release and then close the valve. Is this correct? Are there any tips on getting better pressure or a good seal? Any information would be much appreciated, thanks.

After you insert your banana you open the valve then press against your body and that's it. Then a short time later you press again until you reach the desired pressure.

For better seal shave, don't use the comfort sleeve/pad and for more pressure try pressing with your body and hands at the same time, also use a towel to dry the bathmate and your hands for more grip and stronger press.

 

[Kazza98]

So you don't close the valve after achieving adequate pressure?

 

[Alex1988]

So you don't close the valve after achieving adequate pressure?

No I don't I'm too lazy .