Success with Quick Extender Pro!

[Ultimate Burrito]

I’m really interested to know which unit you purchased. There’s 3 of them (value, standard, limited editions). Most expensive one seems to have a booster and 4000g springs compared to 3000g for the value. I’m measuring around 6.5 x 4.5 . Would love more girth more than anything but is it possible to get an inch girth gain with this device? It’s a big investment to go for the most expensive unit

I got the curvature edition because it offered the highest tension at the lowest price.

 

[Cunny Linguist]

Progress has slowed quite a bit, but I am still making gains. I think by the end of the month I will be at a solid 7.25" BPEL

 

[TakenUsername007]

Great progress brother! Congrats!. I´ve been using the QEP for 3-4 months too and I´ve seen some juicy gains. But the thing is, what happens after you get to use all the rods? Does the extender become useless?

 

[Become]

Hi Cunny Linguist,

Started my journey with QEP a month ago and I'm wearing it 8 hours a day, but if possible, I'd like to know which direction you have kept most, up or down.

Thanks.

 

[Cunny Linguist]

Great progress brother! Congrats!. I´ve been using the QEP for 3-4 months too and I´ve seen some juicy gains. But the thing is, what happens after you get to use all the rods? Does the extender become useless?

Congrats on your gains! You can purchase additional rods from QEP if necessary. For me personally I have more rods then I will ever need, I think I have enough rods to extend to 10"+ if I wanted.

 

[Cunny Linguist]

Hi Cunny Linguist,

Started my journey with QEP a month ago and I'm wearing it 8 hours a day, but if possible, I'd like to know which direction you have kept most, up or down.

Thanks.

I try to do a mix of up and down. Probably a little bit more down because that's the most convienient direction when I am sitting at my desk in my home office.

 

[Become]

I try to do a mix of up and down. Probably a little bit more down because that's the most convienient direction when I am sitting at my desk in my home office.

Thanks so much Cunny Linguist for reply.
As you I'm lucky enough to be able to work from home and therefore make the most of my time, but I'd have another question, namely, whether to create tension you've ever also turned the knurled nuts at the base, thus extending Part I in such a way as to cover one or more notches.

Thanks again and congratulations for the results obtained.

 

[Cunny Linguist]

Thanks so much Cunny Linguist for reply.
As you I'm lucky enough to be able to work from home and therefore make the most of my time, but I'd have another question, namely, whether to create tension you've ever also turned the knurled nuts at the base, thus extending Part I in such a way as to cover one or more notches.

Thanks again and congratulations for the results obtained.

Yes, I do extend the tension rods by turning the knurled nuts at the bottom. Make sure you secure the threaded rods to the base with a thread locking compound like Locktite before you do. The first time I tried turning the nuts, I actually unscrewed one of the threaded rods from the base. Having it jab you in the groin area isn't much fun, I assure you!

 

[Ayoo]

Hi Cunny. Where did you eventually get your silicone sleeves from? I just bought some silicone finger protectors only to discover they were too tight. Thinking of buying some extra large latex gloves and cutting the fingers off.

Good luck with your continued success.

 

[Cunny Linguist]

Hi Cunny. Where did you eventually get your silicone sleeves from? I just bought some silicone finger protectors only to discover they were too tight. Thinking of buying some extra large latex gloves and cutting the fingers off.

Good luck with your continued success.

I tried the finger protectors and the gloves. Both were too thin to be any good. Search eBay for 'Silicone Sleeve for Male Penis Extender Stretcher Max Vacuum Enhancer Enlarger'. I personally bought the large sleeve.

 

[Dangler]

Experiment, trial and error, seems to be the norm.

 

[Cunny Linguist]

Experiment, trial and error, seems to be the norm.

Yup, there's no one-size-fits-all, you have to figure out what works best for you.

 

[closed49752]

Just purchased my QE-Pro and should have it in a week. Thanks for all the great info!!

Grondi

 

[Cunny Linguist]

Just purchased my QE-Pro and should have it in a week. Thanks for all the great info!!

Grondi

I wish you all the best on your PE journey!

 

[qaspaw]

Congratulations, buddy! Thank you for sharing your observations and experiences with others.

 

[Cunny Linguist]

Congratulations, buddy! Thank you for sharing your observations and experiences with others.

Thank you very much! I'm happy to share what I've learned and hope it can be helpful for others!

 

[Cunny Linguist]

So i did my end of month BPEL measurement and am very happy to see that I have gained about 1/8" (3mm). I did not measure EG, but I suspect that has not changed.

 

[Cunny Linguist]

It's been a while since I posted, but I am very happy to report that I have finally reached a BPEL of 7.5" (19cm)! I have not made any measurable gains in girth, but that's fine by me. It is my hope that I will reach my final goal (for now) of 8" BPEL within six months or so. It's amazing to me that I have successfully kept up with extending for the last 11 months and that I have gained as much as I have. I have a sneaking suspicion that once I reach 8" BPEL, I will find that I will want to reach 8.5"! LOL

 

[Ultimate Burrito]

I'm happy to know that I'm not the only person that's had success with the QEP! Congrats man I'm sure you are elated. How many hours/day are you averaging?

 

[Cunny Linguist]

I'm happy to know that I'm not the only person that's had success with the QEP! Congrats man I'm sure you are elated. How many hours/day are you averaging?

Thank you sir, yes I am! I had hoped for these kind of results, but I was skeptical in the beginning. These days I'm only doing 3.5 to 4 hrs per day on average and I have extended 625 hours in total. I typically do a 90 minute session in the morning before I get out of bed and a 90 minute session when I am going to sleep. Extending while laying down really helps me to relax my pelvic floor so that I can remain completely flaccid.

Come the new year I will begin working on shedding 50-60 lbs by the end of May, so I am very hopeful this will reduce my fat pad significantly.