Donjelqer76's 2013 PE log
- Thread starter donjelqer76
- Start date
I've only been using it for about 3 weeks, so not long. I can easily hang more even now, but I don't want to progress too fast
8-4-2013
30 minutes pumping @ 5"hg
250 wet jelqs
20 minutes pumping @ 5" hg
250 wet jelqs
30 minutes pumping @ 5"hg
250 wet jelqs
20 minutes pumping @ 5" hg
250 wet jelqs
Last edited:
8-8-2013
Had a good few days off of PE and starting back up today. I'll update this post throughout the day, as I'm going to break my routine up today.
1030-1130 - 1 hour hanging SO w/pulley with the LG @ 10 lbs.
1500-1600 - 1 hour hanging seated SD with the LG @ 10 lbs.
1930-2030 - 1 hour hanging seated SD with the LG @ 12.5 lbs.
2300-0000 - 1 hour hanging with the LG @ 10 lbs. Did some BTC, some fulcrum over 1" PVC and some seated SD.
4 hours of hanging today. Feels great! Too bad I don't have the time to put in hours like this every day
Total LG hours: 44.5
Had a good few days off of PE and starting back up today. I'll update this post throughout the day, as I'm going to break my routine up today.
1030-1130 - 1 hour hanging SO w/pulley with the LG @ 10 lbs.
1500-1600 - 1 hour hanging seated SD with the LG @ 10 lbs.
1930-2030 - 1 hour hanging seated SD with the LG @ 12.5 lbs.
2300-0000 - 1 hour hanging with the LG @ 10 lbs. Did some BTC, some fulcrum over 1" PVC and some seated SD.
4 hours of hanging today. Feels great! Too bad I don't have the time to put in hours like this every day
Total LG hours: 44.5
Last edited:
8-9-2013
I liked breaking up my hanging yesterday, so I'm going to do the same thing again today.
1015-1115- 1 hour hanging seated SD with the LG @ 10 lbs.
Edit: Looks like this will be my only set today. Got a small vacuum blister that formed on one side of the glans. It's quite small (about the size of a pimple). This is my 2nd vacuum blister while using the LG as directed. I was at 10 lbs for one hour, with -7" hg pressure. My experience from the other small blisters is that it will likely be gone by this time tomorrow.
I think I know what caused this. I wasn't very "plump" when I did my taping, and during my set I did notice that I wasn't getting a good friction-fit against the inside walls of the dome. I'm going to pay more attention in the future to making sure I'm expanded significantly next time.
Total LG hours: 45.5
I liked breaking up my hanging yesterday, so I'm going to do the same thing again today.
1015-1115- 1 hour hanging seated SD with the LG @ 10 lbs.
Edit: Looks like this will be my only set today. Got a small vacuum blister that formed on one side of the glans. It's quite small (about the size of a pimple). This is my 2nd vacuum blister while using the LG as directed. I was at 10 lbs for one hour, with -7" hg pressure. My experience from the other small blisters is that it will likely be gone by this time tomorrow.
I think I know what caused this. I wasn't very "plump" when I did my taping, and during my set I did notice that I wasn't getting a good friction-fit against the inside walls of the dome. I'm going to pay more attention in the future to making sure I'm expanded significantly next time.
Total LG hours: 45.5
Last edited:
What do you mean by -7" HG? negative seven?
Do you think it would be possible when you have time to post how you made your pulley system? I'm trying to make one too
Do you think it would be possible when you have time to post how you made your pulley system? I'm trying to make one too
yes, 7 inches of vacuum applied to the dome as read by the gauge.
I saw there was another thread you replied to showing a pulley. I'll probably post a picture of my setup in there as well
8-10-2013
Everything looked good today, so started my hanging back up. I'll likely do multiple sets throughout the day and update here as I go.
I did protect the are where the small blister formed yesterday (it was gone thismorning) with a small disc of non-permeable tape, and added extra protection to the meatus with Micropore tape before applying my hurt-free tape.
1000-1100: 1 hour hanging seated SO with the LG @ 10 lbs. Felt great
1730-1815: 45 minutes hanging seated SO with the LG @ 10 lbs. Stopped a bit early for dinner with the family
1930-2030: 1 hour minutes hanging seated SO with the LG @ 10 lbs.
Total LG hours: 48.25
Everything looked good today, so started my hanging back up. I'll likely do multiple sets throughout the day and update here as I go.
I did protect the are where the small blister formed yesterday (it was gone thismorning) with a small disc of non-permeable tape, and added extra protection to the meatus with Micropore tape before applying my hurt-free tape.
1000-1100: 1 hour hanging seated SO with the LG @ 10 lbs. Felt great
1730-1815: 45 minutes hanging seated SO with the LG @ 10 lbs. Stopped a bit early for dinner with the family
1930-2030: 1 hour minutes hanging seated SO with the LG @ 10 lbs.
Total LG hours: 48.25
Last edited:
Just a quick report. I had some time to take some measurements.
My BPEL is up about 1/8", and my BPFSL is up 1/4" and back at the peak it's ever been. Things are looking good!
My BPEL is up about 1/8", and my BPFSL is up 1/4" and back at the peak it's ever been. Things are looking good!
I already posted this in another thread, but here is my setup for pulley hanging
It consists of a L-bracket bolted through my desk, an S-hook to attach the pulley to the bracket and some para-chord. The pulley I'm using is this one, and it's quite cheap: Amazon.com: 3211BC 3" Zinc Plated Swivel Single Pulley: Home Improvement
I have a length of parachord with loops tied every foot or so, so that I can pulley hang at different distances from my desk.
View attachment 29391
View attachment 29392
It consists of a L-bracket bolted through my desk, an S-hook to attach the pulley to the bracket and some para-chord. The pulley I'm using is this one, and it's quite cheap: Amazon.com: 3211BC 3" Zinc Plated Swivel Single Pulley: Home Improvement
I have a length of parachord with loops tied every foot or so, so that I can pulley hang at different distances from my desk.
View attachment 29391
View attachment 29392
Last edited:
Not a clue. Nothing noticeable at this point, but I'll probably check in the next week or so
8-11-2013
Starting with an early set again today. I'll update throughout the day again as I progress.
1030-1145: 1.25 hours hanging SO with pulley, with the LG @ 10 lbs.
1640-1740: 1 hour hanging seated SD, with the LG @ 10 lbs.
Edit: Mega-fatigue today. My entire shaft is hella sore today (in a good way)!
Total LG time: 50.5 hours
Starting with an early set again today. I'll update throughout the day again as I progress.
1030-1145: 1.25 hours hanging SO with pulley, with the LG @ 10 lbs.
1640-1740: 1 hour hanging seated SD, with the LG @ 10 lbs.
Edit: Mega-fatigue today. My entire shaft is hella sore today (in a good way)!
Total LG time: 50.5 hours
Last edited:
Well, I just crossed 50 hours (half way to the 100 hour mark), and I work 3 mindnights starting tomorrow followed by a nice break, so I figured it's a perfect time to sneak in a 3-day break from hanging. So far I'm 36 days into using the LG, so I'm averaging just shy of 90 minutes per day, or around 10 hours per week.
Last edited:
Hi I want to ask you, I am hanging for 20 days now but i can't hang without my glans getting cold and blue. So I limit my sets to 15min. I always wrapp my penis but still not helping so it is bad to hang like that? :_)
Cold, discolored glans are a no-no and an indication that something is wrong with your technique.
