Tuesday 7-23-13
250 wet jelqs
13 hours ball weights @ 1 lb
30 minutes pumping @ 4"hg
1.5 hours hanging @7.5 lbs SO with LG
250 wet jelqs
13 hours ball weights @ 1 lb
30 minutes pumping @ 4"hg
1.5 hours hanging @7.5 lbs SO with LG
Donjelqer76's 2013 PE log
- Thread starter donjelqer76
- Start date
Wednesday 7-24-13
250 wet jelqs (before shower in the morning)
13 hours ball weights @ 1 lb (while at work)
30 minutes pumping @5"Hg followed by 1.5 hours hanging SO w/pulley @ 7.5 lbs with the LG (before bed)
250 wet jelqs (before shower in the morning)
13 hours ball weights @ 1 lb (while at work)
30 minutes pumping @5"Hg followed by 1.5 hours hanging SO w/pulley @ 7.5 lbs with the LG (before bed)
Thursday 7-25-13
Taking the day off from ball weights
Morning:
250 wet jelqs
100 v-jelqs
Evening:
30 minutes pumping @ 5" Hg
2 hours hanging SO with pulley @ 7.5 lbs with the LG
Taking the day off from ball weights
Morning:
250 wet jelqs
100 v-jelqs
Evening:
30 minutes pumping @ 5" Hg
2 hours hanging SO with pulley @ 7.5 lbs with the LG
Last edited:
Before it's too late, let me catch up my math and do a better job of updating it daily:
LG hanger : 28.5 hours
LG hanger : 28.5 hours
Friday 7-26-2013
30 minutes pumping @ 5" Hg
250 wet jelqs
2 hours hanging @ 7.5 lbs SO w/pulley with the LG
Total LG hanger time: 30.5 hours
30 minutes pumping @ 5" Hg
250 wet jelqs
2 hours hanging @ 7.5 lbs SO w/pulley with the LG
Total LG hanger time: 30.5 hours
Saturday 7-27-13 to Tuesday 7-30-13
I'll be taking 4 days off from PE. The wife and I are taking off on a little getaway for just us. I'll probably bring my pump for a little fun, and I'll probably jelq a couple of times but that's about it.
When I get back I'll be moving up to 10 lbs with the LG for my daily weight.
I'll be taking 4 days off from PE. The wife and I are taking off on a little getaway for just us. I'll probably bring my pump for a little fun, and I'll probably jelq a couple of times but that's about it.
When I get back I'll be moving up to 10 lbs with the LG for my daily weight.
Probably a good idea as well, bro. You are doing a lot of work to your dick, I think it deserves a time off, don't you agree? 
Good to see all that hard work paid off, I never did get to thank you for all the great info you gave me when I first bought my Penimaster back in January Thanks again.
Tuesday 7-30-2013
Just got back from my little get away, and bumped up to 10 lbs on the LG hanger. Took it kind of easy to feel things out.
30 minutes pumping @ 5" hg. I'm pretty much packing the tube for the first 3/4 of the length anymore
1.5 hours hanging SO with pulley, LG hanger @10 lbs/10"hg. Felt good!
Total LG hanger time: 32 hours
Just got back from my little get away, and bumped up to 10 lbs on the LG hanger. Took it kind of easy to feel things out.
30 minutes pumping @ 5" hg. I'm pretty much packing the tube for the first 3/4 of the length anymore
1.5 hours hanging SO with pulley, LG hanger @10 lbs/10"hg. Felt good!
Total LG hanger time: 32 hours
Wednesday 7-31-2013
I didn't mention it yesterday, but I noticed the tiniest hint of a vacuum blister right near the meatus after my LG set yesterday. By the next morning it was completely gone.
Today I tried a different taping method, as well as reducing the vacuum to 8"hg for the 10 lbs I'm hanging with the LG (as opposed to the 10"hg I used yesterday). I got a feeling about an hour in that the same thing might be happening, so I took the hanger off and inspected. This time there was a tiny hint of a vacuum blister just to the left of the meatus. I think I'm starting to be able to recognize the feeling just as this is starting to happen (which is good, as it enables me to prevent a full-blown vacuum blister).
Anyways, I cut my set short to one hour. I'm going to continue to experiment with different taping techniques and work on continuing to lower the vacuum in the dome. Part of this may also improve with conditioning to the new weight of 10 lbs. I'm not at all disappointed though, I was feeling a deep, deep fatigue just 10 minutes into the set, which I rode out fine for another 50 minutes (until I got this very slight pinching feeling near the meatus, which I'm now starting to associate with the start of the formation of a vacuum blister). Even having removed the hanger 15 minutes ago, the fatigue in the ligs and through the shaft is very intense (i went back to low angles for the day). I will report back tomorrow if this tiny bit of a blister goes away overnight as the last one did.
1 hour hanging with the LG @ 10 lbs. (15 minutes seated SD and 45 minutes BTC)
Total LG hanger time: 33 hours
I didn't mention it yesterday, but I noticed the tiniest hint of a vacuum blister right near the meatus after my LG set yesterday. By the next morning it was completely gone.
Today I tried a different taping method, as well as reducing the vacuum to 8"hg for the 10 lbs I'm hanging with the LG (as opposed to the 10"hg I used yesterday). I got a feeling about an hour in that the same thing might be happening, so I took the hanger off and inspected. This time there was a tiny hint of a vacuum blister just to the left of the meatus. I think I'm starting to be able to recognize the feeling just as this is starting to happen (which is good, as it enables me to prevent a full-blown vacuum blister).
Anyways, I cut my set short to one hour. I'm going to continue to experiment with different taping techniques and work on continuing to lower the vacuum in the dome. Part of this may also improve with conditioning to the new weight of 10 lbs. I'm not at all disappointed though, I was feeling a deep, deep fatigue just 10 minutes into the set, which I rode out fine for another 50 minutes (until I got this very slight pinching feeling near the meatus, which I'm now starting to associate with the start of the formation of a vacuum blister). Even having removed the hanger 15 minutes ago, the fatigue in the ligs and through the shaft is very intense (i went back to low angles for the day). I will report back tomorrow if this tiny bit of a blister goes away overnight as the last one did.
1 hour hanging with the LG @ 10 lbs. (15 minutes seated SD and 45 minutes BTC)
Total LG hanger time: 33 hours
Update on vaccum blister from last night:
The slight blister that started to form about an hour into my set yesterday has completely disappeared over the last 16 hours or so, as did the one that formed the day before.
I go on midnights tonight (5PM to 5AM) so I won't hang again for another 15 hours or so when I get home in the morning. I'll continue to pay close attention during my set tomorrow, experiment with different taping techniques and try a few other things.
The slight blister that started to form about an hour into my set yesterday has completely disappeared over the last 16 hours or so, as did the one that formed the day before.
I go on midnights tonight (5PM to 5AM) so I won't hang again for another 15 hours or so when I get home in the morning. I'll continue to pay close attention during my set tomorrow, experiment with different taping techniques and try a few other things.
This is really great information you are providing here, its detrimental to my purchase of an LG. Thanks DJ. I hope you figure out a good wrap that works for you, we want to see those gains!
I think I know what the problem is..
I have been pumping before my hanging sets. This makes it very hard to enter the dome, as my girth is larger than normal. For this reason I've been using vacuum to assist in pulling my glans in, but in the process the glans balloon out until they contact the inner walls.
Contrast this to entering the dome at my normal girth so that I can press by glans tightly to the back wall of the dome before applying vacuum. I'm thinking that the wall keeping expansion back at the meatus may be in pretty important in prevention of blisters.
My next set, I will hang before pumping instead of after pumping to see if this theory carries any weight
I have been pumping before my hanging sets. This makes it very hard to enter the dome, as my girth is larger than normal. For this reason I've been using vacuum to assist in pulling my glans in, but in the process the glans balloon out until they contact the inner walls.
Contrast this to entering the dome at my normal girth so that I can press by glans tightly to the back wall of the dome before applying vacuum. I'm thinking that the wall keeping expansion back at the meatus may be in pretty important in prevention of blisters.
My next set, I will hang before pumping instead of after pumping to see if this theory carries any weight
Thursday 8-1-2013
2 hours hanging with LG @ 10 lbs. Most was seated SO position.
13 hours ball weights @ 1 lb.
I did two things differently today with my hanging. First, I added a single 1" wide strip of micropore tape vertically over the meatus before applying the normal tender tape. This offered so much protection! I also didn't pump before my set, making it easy to get the tip of my glans right up against the back wall of the LG. Had no vacuum blister issues at all
Total LG hang time: 35 hours
2 hours hanging with LG @ 10 lbs. Most was seated SO position.
13 hours ball weights @ 1 lb.
I did two things differently today with my hanging. First, I added a single 1" wide strip of micropore tape vertically over the meatus before applying the normal tender tape. This offered so much protection! I also didn't pump before my set, making it easy to get the tip of my glans right up against the back wall of the LG. Had no vacuum blister issues at all
Total LG hang time: 35 hours
Friday 8-2-2013
30 minutes pumping followed by 250 wet jelqs before going into work
13 hours of ball weights @ 1 lb. while at work
2.5 hours hanging seated SO (with pulley) @ 10 lbs with the LG after coming home from work.
Did the same taping method as yesterday, along with not pumping directly before entering the LG dome. No vacuum blister issues either. I think I have my problem solved
Forgot to mention, I've been doing my 10 lb. hanging with 8"hg applied to the LG dome with no slippage issues at all.
Total LG hang time: 37.5 hours
30 minutes pumping followed by 250 wet jelqs before going into work
13 hours of ball weights @ 1 lb. while at work
2.5 hours hanging seated SO (with pulley) @ 10 lbs with the LG after coming home from work.
Did the same taping method as yesterday, along with not pumping directly before entering the LG dome. No vacuum blister issues either. I think I have my problem solved
Forgot to mention, I've been doing my 10 lb. hanging with 8"hg applied to the LG dome with no slippage issues at all.
Total LG hang time: 37.5 hours
Last edited:
Saturday 8-3-2013
30 minutes pumping followed by 250 wet jelqs before going into work
13 hours ball weights @ 1 lb.
3 hours hanging SD with LG @ 10 lbs (one set).
Total LG hang time: 40.5 hours
30 minutes pumping followed by 250 wet jelqs before going into work
13 hours ball weights @ 1 lb.
3 hours hanging SD with LG @ 10 lbs (one set).
Total LG hang time: 40.5 hours
Last edited:
Was that 2.5 hours all in one go? If so, that's great.Friday 8-2-2013
30 minutes pumping followed by 250 wet jelqs before going into work
13 hours of ball weights @ 1 lb. while at work
2.5 hours hanging seated SO (with pulley) @ 10 lbs with the LG after coming home from work.
Did the same taping method as yesterday, along with not pumping directly before entering the LG dome. To vacuum blister issues either. I think I have my problem solved
Forgot to mention, I've been doing my 10 lb. hanging with 8"hg applied to the LG dome with no slippage issues at all.
Yes, 2.5 hours was in one set. The fatigue during and after the long sets is incredible to say the least
