Dear Penis Pumpers...

john fin

Registered
Well Done !
Joined
May 13, 2014
Messages
522
Reaction score
4
Points
0
How long did it take you to pack your first cylinder completely?
 

Keepingon

Registered Users (MTT)
Pretty Good !
Joined
May 10, 2015
Messages
3
Reaction score
0
Points
0
Good question i was wondering this also
 

lowpang

Registered
Well Done !
Joined
Apr 17, 2014
Messages
352
Reaction score
6
Points
0
Location
AZ
It takes me about 18-21 minutes in a 2" cylinder
but I do spikes up to 12-15hg every 12-15 seconds, then down to 3-5 for a couple. I'm sure no one will recommend you do it that way… but it works well for me, love the feeling of walking around with a monster.
 

john fin

Registered
Well Done !
Joined
May 13, 2014
Messages
522
Reaction score
4
Points
0
It takes me about 18-21 minutes in a 2" cylinder
but I do spikes up to 12-15hg every 12-15 seconds, then down to 3-5 for a couple. I'm sure no one will recommend you do it that way… but it works well for me, love the feeling of walking around with a monster.

Sorry I meant from when you first bought your cylinder. Have been pumping for a little over 2 weeks now and so far my base is the only thing that pack the cylinder. I was wondering how long it would take for my entire unit to pack the cylinder... 1 Month, 2months a Year etc...?
 

Bryan

Registered
Well Done !
Joined
Apr 11, 2015
Messages
128
Reaction score
4
Points
0
Sorry I meant from when you first bought your cylinder. Have been pumping for a little over 2 weeks now and so far my base is the only thing that pack the cylinder. I was wondering how long it would take for my entire unit to pack the cylinder... 1 Month, 2months a Year etc...?

I just recently started pumping as well and I'm experiencing the same thing. From what I've read and what experienced pumpers have told me, this is very normal because girth grows from the base up, so you'll start packing the bottom and then slowly more and more toward the mid-shaft and finally the head.

I think it can take a little while to start fully packing the cylinder but it will be different for everyone because i think it just depends on your girth gains you know what I mean? As you increase your girth you'll start to pack it more and more until you finally pack it all the way and that point, when you pump you'll start expanding more vertically (length wise) since you'll already be against the sides girth wise.
 

BigO

Administrator, PEGym Hero,"Woofer"
Staff member
Excellent !
Well Done !
Joined
Mar 18, 2011
Messages
30,378
Reaction score
3,466
Points
133
Location
An inch and 1/2 deeper than before
If you want to you can pack it in a few weeks but your just getting fluid build up and any fool can do that.

I used to pack mine all the time but now I almost never do. You should be able to use the same cylinder for a while. Packing is for rookies. Don't stress over it.
 

not2big

Senior Super Moderator, PEGym Hero
Staff member
Well Done !
Joined
Jan 1, 2010
Messages
23,961
Reaction score
1,004
Points
133
Location
Jersey Shore
I started five and a half years ago with a 1.5" cylinder. It took about 9 months before I could fully pack it. I am currently using a 2" cylinder which I can pack 1/2 way up after 20 minutes at 5 hg. If I reduce the vacuum to 4 hg and stay in the cylinder for an hour, I can fully pack it
 

BigO

Administrator, PEGym Hero,"Woofer"
Staff member
Excellent !
Well Done !
Joined
Mar 18, 2011
Messages
30,378
Reaction score
3,466
Points
133
Location
An inch and 1/2 deeper than before
I started five and a half years ago with a 1.5" cylinder. It took about 9 months before I could fully pack it. I am currently using a 2" cylinder which I can pack 1/2 way up after 20 minutes at 5 hg. If I reduce the vacuum to 4 hg and stay in the cylinder for an hour, I can fully pack it
Packing at 5 hg is exactly how everyone reading this should strive to do it. This is steady gradual work and has produced real gains.
 

john fin

Registered
Well Done !
Joined
May 13, 2014
Messages
522
Reaction score
4
Points
0
Thanks for the responses :) Good to hear, thought I may be doing something wrong! Still only doing 3 x 10minutes @ under 5HG, if I go over I notice a lot of discolouration. Will continue to pump for a year and hope to see results :) Would I have to up the time I pump for eventually, if so when should I or is 30minutes enough?
 

Wilkers

Registered Users (MTT)
Pretty Good !
Joined
May 11, 2015
Messages
3
Reaction score
0
Points
0
Thanks for the responses :) Good to hear, thought I may be doing something wrong! Still only doing 3 x 10minutes @ under 5HG, if I go over I notice a lot of discolouration. Will continue to pump for a year and hope to see results :) Would I have to up the time I pump for eventually, if so when should I or is 30minutes enough?

Glad you started this thread
 

youforme93

Registered
Well Done !
Joined
Jul 23, 2012
Messages
528
Reaction score
10
Points
38
Location
PA
I may be wrong (and someone please correct me if I am) but some discoloration is not necessarily a bad thing.
 

GTO

Retired Moderator, PEGym Editor, PEGym Hero
Joined
May 21, 2010
Messages
5,449
Reaction score
165
Points
83
Location
Oh ... just around ...
I've been pumping for several years now and I didn't get to the point until I packed without edema until maybe 2-3 years in (and I pump a lot). These days, I can hardly fit my 2" (it's a tight fit) and I can pack my 2.25" in maybe 20 minutes of session time. Current goal is my 2.5" with no edema - which will probably take another couple years.
 

kong15

Registered
Well Done !
Joined
Dec 10, 2014
Messages
535
Reaction score
6
Points
0
At what point do you know u need to move up in size? I'm 7.25 inches in length minimum in my pump and I pack out if say around 3.5 inches. Do I wait until my entire length packs it to move up to a 2.25" cylinder? I have a 2.00" cylinder now.
 

BigO

Administrator, PEGym Hero,"Woofer"
Staff member
Excellent !
Well Done !
Joined
Mar 18, 2011
Messages
30,378
Reaction score
3,466
Points
133
Location
An inch and 1/2 deeper than before
I ordered a 2.25 once I could pack my 2 inch all the way.

As GTO pointed out above, packing without edema is the goal.

I start with my 2 inch cylinder for 10 to 15 minutes then change cylinders for the rest of my pumping.
 

kong15

Registered
Well Done !
Joined
Dec 10, 2014
Messages
535
Reaction score
6
Points
0
But most people's girth isn't equal the entire length of the shaft. So aren't u restricting growth of the the parts that are packing out already while u wait for the rest to catch up?
 

closed224

Senior Member, Member of the Month Dec 2014, Feb
Well Done !
Joined
Jun 2, 2014
Messages
18,561
Reaction score
268
Points
0
Location
in cold
No, you are encouraging the penis to grow the full length. Unless your goal is to create a spear head stay with the cylinder until you fully pack it. Stay with pressure from2-5 hg and slowly increase time. I still use all my old cylinders in succession. 17\8 is usually the exception. If I am erect I can't fit in. If flaccid or semi then I use that cylinder.
The 2 inch I pack almost immediately, but I stay in for a full set to work length. The 2.25 I pack in about 10 minutes but again stay in for length. The 2.5 I pack about 2 inches up. I want this one to pack fully but not there yet.
The 4.5 I use for full package pumping. Helps on scrotum and testicles and is supposed to help with length. This is not my favorite and I don't use it as much as the others.
Lower pressures avoid edema and bring blood expansion.
 

Jay1983

Senior Member, Member of the Month Apr 2014, Sept
Well Done !
Joined
Jan 24, 2013
Messages
19,525
Reaction score
449
Points
103
Location
MIA!
My glans is so big that it cuts off the vacuum around my shaft, before I hit 5hg. I doubt I will ever completely pack my cylinder because of this.. meh.

Anybody dealt with such a thing? I air pump. I'm gonna do more inspecting tomorrow, today is rest, and try to figure something out. Gotta pack that cylinder!