Ok,
So I was asked by a PE'r as to how I put the Silicone sleeve on my LG Hanger.. So I took some pics of how " I " do it.. I'm not endorsed, blah, blah haters, doubters etc. leave me alone, moving on.. The way I do it is this:
I'm left handed, so I take the dome in my left hand and stretch the sleeve like so, note the orintation etc in my hand of the dome and the same for the sleeve.. Also note my fingers on the sleeve..
I then stretch it keeping a finger or 2 close to the dome.. I use ether the middle or the ring finger to do this.. I stretch and I pin one side of the sleeve up on the dome as fair up as I plan to go with the sleeve..
In my case I put it over the groove and up on the smooth surface on the top half.. For some reason I get a better seal with this.. Marlon may say different, but I kept losing pressure, doing this and adding the rubber band (2 if u want) in the groove stopped it.. So I go with what works for me..
Next, I work it all the way up and over using my index fingers at this time to get the final placement.. I will grab and stretch the back, back and forth until it's on the dome evenly and not pulled to one side or the other.. Then I add the rubber band (2 is optional and may help??)
