Just got my PENIMASTER PRO AND HAVING TROUBLE PUTTING MY GLANS THROUGH.....

[masgrande007]

Hey all

Just got my Penimaster Pro today... I am having trouble getting my gland through the sluice. the first ring.... the fucking latex is so tight and I cant get my cock through the 1st latex. I used the largest latex they had. Does anyone have this problem??? It sooo difficult, i felt like i wasted money on another extender.

does anyone have any videos on putting it on? Not the ones from penimaster site.

thanks...

 

[mosyyy]

Haha vive les extenders!!! I had the same problem and I read on the forum that many many people also have problems with them. Well, sorry for not giving you any advice. I just want to tell you you're not the only one having problems with them

 

[masgrande007]

ughhhhhhh..... thought the penimaster pro is suppose to be the mercedes of extenders. Cant even put my glans through the thing.

hopefully someone can help.

 

[Dangler]

The learning curve is steep, but short.
There are videos, plenty of them, you'll have to look for them here at the us site:
PeniMaster penis expanders product family

There is a Penimaster Pro Group, good reading, link is in my signature.

1. Start with maximum opening sluice ring, for training, not so much for wearing.
2. You might try a Water based lube at first, to help get your GLANS into the chamber. It takes a combination of you pushing your glans in, while at the same time creating a vacuum on the other side of the diaphragm to assist in pulling in (both you diaphragm and your GLANS).
3. Practice making the vacuum by causing the diaphragm to be drawn into the chamber, leave your dick out of the process, while you perfect this operation. Your choice in using either the Squeeze bulb or the hose to create the vacuum.
I found the hose more preferrable, and later modified/added parts so I can use my Pump (brake cylinder hand pump from Harbor freight, plus a few fittings).
4. Don't try to do it all at once, it can be frustrating. Keep each learning phase simple.
be patient....
good luck.

 

[coltjustice]

Listen to everything Dangler said he helped me with a number of PMP issues. What is also helpful is to be semi erect (maybe 50%). In other words, you want to be hard enough to push through the sluice and into chamber. Read the PMP user group as Dangler said....DJ76 has useful tips there as well.

 

[masgrande007]

thanks dangler..... i will work on it... but i found something that is very helpful..... using the esl40.com with it. check out my photo album in my profile. cheers

 

[coltjustice]

thanks dangler..... i will work on it... but i found something that is very helpful..... using the esl40.com with it. check out my photo album in my profile. cheers

You are welcome

 

[RickDick1]

You aren't the only one! Bulb suction is a piece of crap! If anyone decides to pay the $300 for this piece of junk, make sure and buy the suction hose - the pump bulb is worthless! Of course it adds to the cost, but if it works, what the heck. I have read post after post about the suction hosing being preferable to the pump bulb, so I am in the process of buying the suction hosing. I hope this works, or I will be writing a scathing review to stay away from the Penimaster Pro!

By the way: I wrote to them about the issues over two days ago, and no reply. Imagine that!

 

[RickDick1]

Yeah, the customer support from Penimaster appears worthless, too. The bulb does not work worth crap. I'm in the process of paying even more, and buying the suction tubing.

Also, their site / documentation / video does NOT appear to address how to buy the right sized latex parts - parts that wear out, and require replacement - the parts most be bought in sets, and cost about $8.00 a piece. There is a small, medium and large latex cap, and the same for what they call a sluice. There is not one bit of information regarding which to size use - you are left to guess - though these parts wear out, and you MUST have replacements! This is the one huge downfall / problem I see with Penimaster (besides the bulb pump). I will fill everyone in when my suction hose arrives - 2 weeks from now!!! That is one other thing: Penimaster takes nearly two weeks to deliver anything! Remember that if you need merchandise / parts now! So far, Penimaster gets a bad rating from me. Paid over $300, and the bulb pump is worthless. Honestly, I cannot use the device. if the hose doesn't work, I will have wasted nearly $400 on this crap!

 

[ykm123]

I agree the bulb SUCKS!!! The hose is awesome though and they need to make that part of the regular package. Makes putting it on very easy for me. In the video below I talk a bit about the PMP. I have other vids showing how I put it on and explaining certain aspects of it. The PMP is my favorite extender.

For sizing of the sluices I use a large (blue) diaphragm and the medium (beige) sluice. I can use all the diaphragm sizes but of course the green and beige rip sooner. I can use a blue one for a month. Make sure you use enough of the lube.

https://www.youtube.com/watch?v=OTfVygRoVGM

 

[Dangler]

look around here:
https://www.pegym.com/forums/groups/penimaster-pro.html

I never had much success with the bulb either. I was then motivated to find other ways.
The key is having the glans drawn into the chamber while some pushing is done.

Experiment with a very simple setup. Attach the bulb to the chamber, leave your penis out of this. Now try working out how to use the bulb to draw the latex diaphragm into the chamber. Then how to remove the bulb without disturbing the vacuum.

I like the hose method better. I needed to make a longer one, as theirs was so short, my back hurt trying to bend over to use the hose. Sounds obscene, lol.

 

[RickDick1]

Thanks for they reply! I ordered my suction hose for the PMP lastnight, as this sounds like the way to go. What the flock is up with their customer service? You would think these guys would want to help folks with issues regarding their product. I can't wait to get going!

 

[RickDick1]

Thanks again for the reply. I wanted to mention that I switched to Penimaster Pro because the other extender I purchased - Sizegenetics - was an issue. Sizegenetics advertises a "comfort strap" that is a big selling point (over noose method, and such), but what I found after purchasing the product is that the comfort strap will NOT hold my penis in place! Yep, slips out everytime. I tried every single configuration with what they provided in the package - foam ring, non-slip black pad, 3-M pad, Velcro, etc., - and nothing, BUT NOTHING, would make the comfort strap work! This left me with the noose option, and I got severe edema after the first usage. I have written customer support at least 5 times, and they are worthless. Honestly, given the responses, I wonder if they read the emails I send, or if they do not understand English. Seems to me they provide canned responses to inquiries. Worst part is that they refuse to give me ANY of my money back, though they have a 6 month money back guarantee! Of course they expect you to use the product for 6 months, and prove you have had no gains, before they will entertain giving you your money back. What if you can't use the contraption at all? Has anyone on this board tried to get their money back from Sizegenetics? I even offered to let them keep $100 of my money, but refund me the other $298, offering a win-win. They refused! I'm guessing that once you give them your money, you will NEVER obtain a refund. BUYER BEWARE! If you have a thin penis, the comfort strap provided by Sizegenetics will NOT work - PERIOD! Try and pad it all you want, it will not work. Then you are stuck with the noose (and not being able to wear the device more than 20 min at a time, before having to remove it and massaging the head of your penis).

 

[RickDick1]

Honestly, it takes a bit of experimentation / trial and error. I have been using my Penimaster Pro for about a week now. I took measurements, as Penimaster documentation suggested, and tried using the ring insert, cap, and sluice for a smaller size glans (the green one). I too had difficulty getting the glans into the Penimaster when using the ball pump. The ball pump is WORTHLESS! Absolutely worthless! I went ahead and bought the suction hose, and it works amazingly well! Makes the whole process so simple. The only issue I had was getting the entire head into the device. Consequently, the suction would latch on, but the thing was held on by only the top portion of the glans. NOT a good thing. After three hours of that, I got sore. It was even a bit painful releasing the suction, and having the device let my glans slide out! And the top of my glans were as white and swollen as could be. I figured something had to be wrong, and began messing with the configuration: trying the other set of ring inserts, and different size cap and sluice. The result? Using the medium cap and sluice, and the ring inserts for a medium sized glans (the smaller, thinner ring inserts), and the suction hose, I can easily get the Penimaster to take in the entire glans, and wear the device comfortably for hours!

Suggestion: if you have a large glans, I suggest putting in the ring inserts for a medium sized glans, and putting the glans up to it to see if it would easily fit when suction is later applied. It will, then go ahead and use those ring inserts. If not, forget the ring inserts altogether. I would also start with the large cap and sluice. Make sure to use lubrication and the suction hose, and not the bulb pump. You use that bulb pump, and it will never work!


Anyway, that is my suggestion. Good luck!

 

[Dangler]

Thanks RickDick1, keyword --> EXPERIMENT. even how much or how little lube in use, can change things.

 

[1Lucky1]

Where it you get your parts for your pump to work with the pinimater pro. Can you describe the parts you got and where. I can't even find the hose to work well
'

 

[gtopont]

had problems and almost gave up. then I only put lube on the head of my member. NOT ON DEVICE.you may need to help it in with your finger.remember it takes a couple of seconds to go in it sucks in slowly .squeeze ball all the way and hold until it pops in!it works now! remember company suggests using vacuum pump first.use it for a minute or two after it fully stretched from the pump.WOW! it works!one more thing !!!! if u don't get all the way in. just use the ball suction one more time to finish .but do not let the air out from first time.its just that u may need two suction attempts.DONE.remember to read why they want u to use the vacuum pump first IMPORTANT for sure.amazon has one that's great,they say its the best selling pump.it charges from your computer company name is Paloqveth...i think..

 

[DJU4ic]

I have no problems whatsoever with the bulb suction. If you follow the directions exactly, it will work. Mine worked on the first try. I also have the tube, but haven't tried it yet because the bulb works so well for me.