Many members have been asking questions about my tubing pics, so here are some answers
This is an advanced exercise and one should only attempt after the penis is very well conditioned. I found this method from the Diamondback Thread. I used tubing to help my turtling because of Adderrall medication. I can contribute my flaccid hang to this tubing method. The links in this thread are directed to my photos where you will see my penis in the tubing. You have been warned.
Creating Tubing
The tube can be found at a hardware store. It is 1.25” vinyl ID clear tube of which I bought 2ft of it. The idea is to cut it smaller then your flaccid hang but enough to keep it extended. It took me a couple tries and that is why I suggest a couple feet of the tubing. You may have to cut it tailor the head of your penis as well as base. Use sand paper or emery paper or even a dremel to smooth the edges.
Tube Front Hang
Tube Side Hang
Adapting Tubes
Over my tubing time I have adapted my tubes and currently just created a new longer tube. As my flaccid hang has increased so has my tubes.
Tube Progression (You can see my novice first tube and how they have changed over the months)
When to Update to New Tube
There will be a point when you need to lengthen the tube. You will notice that your flaccid is longer then before and you can add some length. I use stretched out cock rings to help add initial length before creating a new tube
Tube With Ring
After I maxed out the rings I created a new tube and I am still adapting but it is longer then the tubes above
Longer Tube
Longer Tube 2
Putting On Tube
Once you have your tube made…now it is time to use it. You enter the tube in the flaccid state. It will not fit with an erect penis! When I started, I tried to jam my unit in the tube and it was very difficult. I wasn’t utililizing the tube as how I wanted to. So I took the string out of a pair of old shorts and tied it around the head of my unit. I pull the string through the tube and use lotion as the lube (cocoa butter lotion). I carefully pull my penis through the tube and it usually pulls through nicely depending on how much blood is in my penis. The tube should hang there without needing to make adjustments. I check it periodically and use lotion around my balls as needed to prevent chaffing.
Comfort
I have worn it up to 12 hours but 4-6 most days and do not have to remove to use the restroom. I do not notice it unless I have to bend over. So it is very comfortable once you get it tailored around you. My base is 5.6…mid 5.3 and top is 5 so as the day goes on, I do battle my head slipping through the tube. This is the only limitation I come across. If your penis is the same throughout you more then likely wont have that problem. I have solutions but that is what prevents me for using it 12+ hours.
Sleeping With Tube
I have tried to sleep with it, but two problems. One it just isn’t comfortable because the tubing is to rigid and hard. Second, and more important, when an erection starts throughout the night, this is when it can be uncomfortable and even dangerous. You need an exit method
Exit Strategy
The exit method is to grab the tip of the head and squeeze the blood out of the head while pulling your penis through the tube. Once practiced enough, it is very simple.
My results
My flaccid penis is beefier with more veins longer and wider. Tubing has helped my flaccid hang greatly and I have even noticed some length gains from tubing. Here is what my hang looks like after I take it out of the tube.
After Tube Hang
After Tube Hang 2
Cutting The Tube
You are going to be wearing this flaccid so it is important that the fit is snug and to make sure your head doesn't slide through the tube. Start by measuring flaccid length, either BP or NBP it doesnt matter to start with. Then take about an inch off of that measurement. This will get you used to wearing the tube for hours and will help prevent your head pulling through. You will have to modify according to your penis. It does take some playing with to get the first one to work.
Once you have the tubed cut, make sure you sand the edges so they don't make you chaff.
I hope this helps clear up some questions. I give full credit to Diamondback and thank him for introducing me to this method. I use a combination of methods to achieve my goals. This is just another one in the bag of tricks. I believe this is an aid to whatever program people are using. I have found out it works better with pumping and clamping then hanging.
Last edited:
