Homemade Penis Pump

[DryJelq]

I've been using this type of plunger as a makeshift penis pump. Make sure you get something really sturdy. The stronger it is, the more sucking force it can generate. No modifications required. Simply squeeze down the accordian part all the way and then put it over your dick. When you let go the material will want to relax and will generate a large amount of sucking force. If you get a good seal, you won't even have to hold it, you can simply just let it go.

I gained about 3/16" of midshaft girth with no skin swell doing this earlier today. However, I have never used Bathmate or any other penis pumping device.

Pros/Cons:
It's not the most comfortable thing in the world and getting a good seal is rather difficult. However it surely wins out in cost and discreetness. You can buy one of these plungers for less than 10 bucks and no one will ever suspect you of using this as a penis pump.

This is a rather new idea for me. I haven't attempted any modifications to improve this homemade device. If anyone does attempt modifications, then please let me know. I would recommend any modifications be done as an attachment to the base of the plunger.

If used properly, it should work in a manner very similar to the Bathmate.

 

[millia]

+Mother freakin rep (pardon my language)
BUT THIS IS BRILLIANT!!

 

[Widget123]

What kind of results would one expect if used in combination with PE? (In terms of rate of growth)
The Bathmate claims gains of 1-3 inches. does it have the potential to exceed that projected growth maximum (1" - 3") if used in Combo with PE?

 

[Southpaw]

I may have to pick one of these up!! Great thinking!

 

[DryJelq]

I have yet to try this device in the bathtub. So I couldn't tell you if there is any difference when it is full of water instead of air. My guess is that it would create more sucking force.

 

[The Dedicator]

Another down-side is being unable to watch your penis in action....although seeing it isn't extemely necessary

 

[DryJelq]

I've been using this a bit more and I can say it works a lot better when you fill it with water.

In my limited experience with pumping, I will say that the pumping hasn't done much for gains, but it has helped out a lot with keeping my EQ higher. I'm strongly considering getting a bathmate at some point as the water-based system is clearly superior to the air-based system and I think it would work a lot better than this cheaper homemade version. However if you look at an online demo of the bathmate and see how it works, you can see that it works exactly the same as the plunger except that it's clearly designed for penises and not unclogging toilets.

 

[blackirish]

How do you use this? With an erection? And do you continue to pump it up and down while you're inside?

 

[DryJelq]

The way I've used it is in the shower.

1.) Flip it upside-down and fill up the plunger with water through the tub spiget.

2.) Squeeze the accordian part all the way down and hold it.

3.) While standing up and hunched over, put your flaccid or semi-erect penis into the plunger. Inserting your penis should push more water out of the plunger.

4.) Push the plunger against your pubic bone and scrotum and let the accordian part relax. At this point you should feel a strong sucking force. You might hear some fart sounds if you didn't get a good seal.

5.) After 15 seconds or so your dick should be larger now and filling up the plunger. You should be able to tell if you need to resqueeze the plunger as the accordian part will no longer be as compressed.

6.) I'd recommend doing this for about 5 minutes. First timers to pumping need not use water. You can vary the intensity of the pumping based on how much you compress the plunger. If you don't want it to be as intense, then simply don't compress the plunger completely. Filling with water is much more intense, so be careful if using water.

7.) Once my dick starts to get erect from pumping, I like to put my hand under the base and pull the plunger away from my pubic bone while maintaining a tight seal. This increases the intensity even more.

8.) Do some kegels to really get your penis as full of blood as possible.

 

[Mc Dong]

LOL!!! A plunger as a pump. I wonder if this would actually work??? Anyone out there try this? I am curious and might give it a shot.

MD

 

[vacuumsalesmilkman]

This is awesome

 

[thenewdude]

WOW! Hey, I can one of those plungers!

 

[DryJelq]

This does actually work quite well if you put water in it. I haven't done this in years tho. Now I pretty much just stick to edging and hand exercises.

 

[NauseousOuroboros]

I got a really big accordion plunger but the opening was only 4.5in diameter, so what I did was took a blowtorch to it and molded the plastic quickly by pressing it into a larger circle with a round plastic rod. This expanded the opening and also softened the edges so they aren't sharp anymore. I think it gets a better seal with the edges melted this way too.

 

[Dick Whammy]

I've been using this type of plunger as a makeshift penis pump. Make sure you get something really sturdy. The stronger it is, the more sucking force it can generate. No modifications required. Simply squeeze down the accordian part all the way and then put it over your dick. When you let go the material will want to relax and will generate a large amount of sucking force. If you get a good seal, you won't even have to hold it, you can simply just let it go.

I gained about 3/16" of midshaft girth with no skin swell doing this earlier today. However, I have never used Bathmate or any other penis pumping device.

Pros/Cons:
It's not the most comfortable thing in the world and getting a good seal is rather difficult. However it surely wins out in cost and discreetness. You can buy one of these plungers for less than 10 bucks and no one will ever suspect you of using this as a penis pump.

This is a rather new idea for me. I haven't attempted any modifications to improve this homemade device. If anyone does attempt modifications, then please let me know. I would recommend any modifications be done as an attachment to the base of the plunger.

If used properly, it should work in a manner very similar to the Bathmate.

I've seen that idea posted before, LONG ago. It is a good budget item I got to admit. The bathmate is kinda based on the BELLOWS Idea for pumping. Just make sure you store it in a place where no one is going to pump the crap from a clogged toilet. Drano and crap bacteria just don't jive well with penises! Also, that base has got to be murder cutting into your fat pad. Good luck.

 

[Cinest]

I'm going to get this. I'll be using silicone o ring lube to aid in sealing.

 

[NauseousOuroboros]

I'm going to get this. I'll be using silicone o ring lube to aid in sealing.

You'll definitely need it. My problem right now and the reason why the bathmate works so well is that the plastic this plunger is made of is hard not soft rubber. It doesn't want to mold to the base of my shaft and create a sealed suction. Plus with doing this in water, liquids won't really aid in creating a seal. I'm finding myself looking for a soft rubber O ring now to seal inside the opening so the suction seals off.

I'll try and refine this, my goal is to make a cheap and affordable DIY water pump. I'm stingy as fuck and Bathmate isn't getting a Benjamin from this guy. Especially not when I see the scumbags double the price in the span of 2 months. Shameless bastards.

 

[MeatPuppet321]

I bought the Penomet with all the gaiters & extras cost me I think around $300...insane right for something so simple..
Well the gaiter is brilliant design..But for more suction guys have gotten this Houdini wine vac preserver..I just got one myself 2 days ago..

As I was using it the other day I thought to myself why couldnt a guy get a big fishtank cleaner tube drill a hole in the end the same size as the houdini wine stopper & maybe some foam for padding...This would be the only water pump one would ever need cause you control the force not some gaiter system..
Easy & cheap fish tank cleaner what $10 houdini wine vac $10 = one insane CHEAP pump..!! lol

 

[eighthportal]

I bought the Penomet with all the gaiters & extras cost me I think around $300...insane right for something so simple..
Well the gaiter is brilliant design..But for more suction guys have gotten this Houdini wine vac preserver..I just got one myself 2 days ago..

As I was using it the other day I thought to myself why couldnt a guy get a big fishtank cleaner tube drill a hole in the end the same size as the houdini wine stopper & maybe some foam for padding...This would be the only water pump one would ever need cause you control the force not some gaiter system..
Easy & cheap fish tank cleaner what $10 houdini wine vac $10 = one insane CHEAP pump..!! lol

I think your onto something here.. it would just 'suck' if it malfunctioned and gave you a wicked injury. How powerful is a fish tank cleaner?

 

[MeatPuppet321]

Their usually made of acrylic super strong
For the padding at base one could cut a pool noodle to fit