cheap extender

[nixonz]

hi guys.
i read a book about PE, but i really lack discipline for exercising everyda so i decided to buy a proextender, but its really expensive. i found a cheap version on amazon though. here is the link
http://www.amazon.com/Penis-Enlargement-Extender-Device-Length/dp/B004RJYWW2/ref=sr_1_1?ie=UTF8&qid=1321386169&sr=8-1
i would like to know if anyone tried this product. from the review it seems pretty cool.
thanx in advence

 

[Steve23]

Doesn't seem to have much info on it like how many extra rods it comes with, if any. You may need to add or remove some, etc.
Check out ebay also they have lots of cheap ones too.

 

[NOSCOP3]

I have a $30 one from eBay and it has 1/2", 1", 1+1/2", 2"rods - that one looks like the same model, but with less rods.

 

[cantwait]

I have a $30 one from eBay and it has 1/2", 1", 1+1/2", 2"rods - that one looks like the same model, but with less rods.

How has this extender work for u would u still go with one over a name brand one

 

[hairyboy87]

I actually just bought that exact model. I'll update everybody when it comes in.

 

[nixonz]

wow cool. waiting for your updates

 

[darinsixpack]

I've just looked at Amazon usa and that extender which they sell for $32.99 (the cheap proextender version) can actually be bought direct from China for about $16.

Well heck, they are probably all made in China, even the X4's and the Andros, who knows, They probably cost about $1.80 to produce and are sent to the manufacturers for about $5 total cost each. The rest is all marketing and slight overhead and PROFIT. Think about it, it's plastic and a few metal bars and screws. But hey, it seems to be working so far.

 

[schlittle]

Well heck, they are probably all made in China, even the X4's and the Andros, who knows, They probably cost about $1.80 to produce and are sent to the manufacturers for about $5 total cost each. The rest is all marketing and slight overhead and PROFIT. Think about it, it's plastic and a few metal bars and screws. But hey, it seems to be working so far.

By the time you had posted this my post had been removed because the chinese site which i had seen the cheap extenders hasn't got a great reputation.

But i reckon you're right about the expensive selling extenders are really incredibly cheap to make.

 

[hairyboy87]

Okay. I have had that extender for a few days now. I think it's exactly like the expensive ones, i honestly see no difference in quality. The one problem that I had was difficulty getting the appropriate traction, and the reason that I had this problem was because the cheap extender only game with two expansion rods(for each side). Adding both the long and the short rod was too long for me, adding just the long rod was long enough to stretch but not long enough to get tension. I worked around this, though, as I had a few motherboard standoffs (Amazon.com: StarTech M3 Brass Motherboard Standoffs - 15 Pack STANDOFFM3: Electronics) kicking around that happen to screw perfectly into the extender. problem solved, sirs.

 

[BBS]

hi guys.
i read a book about PE, but i really lack discipline for exercising everyda so i decided to buy a proextender, but its really expensive. i found a cheap version on amazon though. here is the link
http://www.amazon.com/Penis-Enlargement-Extender-Device-Length/dp/B004RJYWW2/ref=sr_1_1?ie=UTF8&qid=1321386169&sr=8-1
i would like to know if anyone tried this product. from the review it seems pretty cool.
thanx in advence

If you lack discipline I highly doubt extending will be any benefit to you, extending takes a lot of hours and is not as easy as it looks. Just like everything in life you get what you put into it. Lack of discipline is just another word for lazy, if you want a bigger dick then get motivated. Good luck!

 

[nixonz]

Okay. I have had that extender for a few days now. I think it's exactly like the expensive ones, i honestly see no difference in quality. The one problem that I had was difficulty getting the appropriate traction, and the reason that I had this problem was because the cheap extender only game with two expansion rods(for each side). Adding both the long and the short rod was too long for me, adding just the long rod was long enough to stretch but not long enough to get tension. I worked around this, though, as I had a few motherboard standoffs (Amazon.com: StarTech M3 Brass Motherboard Standoffs - 15 Pack STANDOFFM3: Electronics) kicking around that happen to screw perfectly into the extender. problem solved, sirs.

so u just screwed these motherboard standoffs instead of the rods?
thanx i will deffinately buy that extender. thanx for the info

 

[hairyboy87]

I screwed the longer rods in, and then I screwed standoffs into the ends of those. In the interest of full disclosure, those standoffs I linked you to were for reference. I build computers for a living and I have tons of motherboard standoffs lying around the workshop. All of them were able to screw into the ends of the bars, but only some of them were able to nest inside of each other, others were not.

In case it's not clear, adding one standoff to each bar adds about 1/4 of an inch in length. I found some that fit inside of each other and I hadded two to each bar, for about 1/2 inch of additional length. For my penis, this is the correct size to get proper tension. Once it has stretched a little longer, I will add a third standoff, and once it is a little longer than that, I will remove all standoffs and use the smaller set of bars that came with the extender. Etc, etc.

 

[nixonz]

I screwed the longer rods in, and then I screwed standoffs into the ends of those. In the interest of full disclosure, those standoffs I linked you to were for reference. I build computers for a living and I have tons of motherboard standoffs lying around the workshop. All of them were able to screw into the ends of the bars, but only some of them were able to nest inside of each other, others were not.

In case it's not clear, adding one standoff to each bar adds about 1/4 of an inch in length. I found some that fit inside of each other and I hadded two to each bar, for about 1/2 inch of additional length. For my penis, this is the correct size to get proper tension. Once it has stretched a little longer, I will add a third standoff, and once it is a little longer than that, I will remove all standoffs and use the smaller set of bars that came with the extender. Etc, etc.

understood. thank u very much. one more question though=) is the quality of the device good. i read a review on amazon that said that the metal was bending easily and the plastic broke down

 

[hairyboy87]

I have only had it for about a week, and I haven't had any problems with metal bending. The only problem that I seem to be having is that all of a sudden the noose keeps slipping (as of this morning), but this actually seems to be a common enough problem with extenders from what I've read online. Also the instructions that come with it are only kind of helpful. The information on these forums was much more helpful, and after studying these forums for an hour or so I went back and re-read the instructions and they started making a lot more sense.

 

[ThomasJohnThomas]

I have that one. I have nothing to compare it with, but don`t think it is the best quality.

 

[ThomasJohnThomas]

And now I just stepped on mine and broke it! Good it was a cheap one Meh, who needs it anyways?

 

[hairyboy87]

Don't misunderstand, if I had the money to blow I would have definitely gotten one of the big known brands. But this was great on a budget. I was leery about spending so much money on a device when I wasn't sure if I would be able to dedicate the hours a day necessary for gains to it. I bought this one and I'm really glad I did. I will eventually buy a "better" one, but not until this one stops serving its' purpose.

Also, I got suggestions on how to fix my slipping problem elsewhere in this forum.

Thomas! You must really not have cared for your extender to have left it on the ground! Did you get a better extender? Do you even still extend?

 

[ThomasJohnThomas]

Thomas! You must really not have cared for your extender to have left it on the ground! Did you get a better extender? Do you even still extend?

It happened just now! I just went to the bathroom and stepped on it on my way back. Never extended that much, did not really feel much of a preasure/stretching feeling from it.