Fli's Male Edge extender experience

[ncurt]

male edge pro

male edge pro

Hi
I bought one a week ago to supplement PE routine-am nearly finished 90 day Jp's routine.
The Male edge forum is broken since 3 months and they are introducing a new one-I spoke over the phone to Male Edge and got put through to the company director who was very friendly and helpful.
I phoned because the instructions are unclear and insufficient,they acknowledged this is the case and are in the process of writing new ones.

I think the device is a good one,very light but a little "quirky" in fitting,but once you get used to it then all is fine,It keeps good tension
starting with 800g,1200.2000 ending with 2800g.
As Calixto said you will feel your shaft like a nylon guitar string under tension and as Fli said you feel feel a stretch and sometimes a burn.You can indeed get a head swell with it and then wrap adhesive gauze around the glans base before straping into the mounting plate.
The plate can be reversed,if say you are over 4inches flacid,as this will give more of a pull when loading the plate onto the rods.

I will keep you posted,as am due to measure progress in two weeks
cheers
ncurt
give a man a fish and you feed him for a day-teach him how to make a huge rod..

 

[Dangler]

Well I knew this bro, but my extender does not even have the option of "taking off the cradle" like the Peni-Master or the Male-Edge. I have to do it "All at once" and I can do it, but I think YOUR extender would make it WAY easier.

Calixto, check out how to put the X4 on in two separate pieces.

http://www.flickr.com/photos/treetopx4lpics/sets/72157621814231118/

 

[Fli-Fisher]

So here it goes...

First off I would suggest ordering from a local distributor if you have one. It took me almost a month to get mine from Denmark. Male Edge shipped it about 6 days after I placed my order... It did however arrive in the U.S. 2 days later so it was mainly the U.S.P.S. that caused it to take forever... It also has to come through customs which takes time.

The first photo is of the package it came in. Nice case but if you ever leave it out and someone sees it... the case literally screams look at me. So I am still trying to find a place to keep it. It is defiantly well built, I fell you could throw this in a river and pick it up a mile down stream and it would be just fine.

The second photo is the package opened up with the contents inside. It comes with a ruler (in cm), Video CD, 5 comfort straps, 2 memory foams, gauze, and the medieval contraption (as my wife calls it), really, its the base and head piece.

I really like the way they have it set up. The head piece that is removable, can be adjusted up or down the rod shafts. Or it can be turned around and then moved up or down the rods to help dial the correct length in. The base rods can also be adjusted to different lengths to further get the correct size and tension dialed in. The main thing I love about this extender is that there is so many different ways to put it on. It is highly customizable. I do wish the base was a little bigger around. I am at a 5" mid base girth and when I put the foam piece on I have to squish it through. I have seen some devices where guys would put there balls through also and then stretch. Not this one, there is no getting your balls through there. Plus it might help with turkey neck keeping your balls pressed against your body while your penis is being stretched.

The third picture is of it standing up on my counter and you can see a hole in the rod, that is where the head piece clicks into and there are a whole bunch of those along the rods. It supposedly can accommodate up to 11". The rods can be pointed in pretty much any direction and they will stay there so you can work the angle of your desire. The higher the tension is set on the the extender, your rods will move to where your penis is the shortest stretched length.

The forth picture is to give you an idea of how big this thing can get. It still isn't maxed out in this picture, almost but not yet. There is also no freaking way you are wearing this under clothes out in public. I have a very loose pair of black shorts that are made out of sweat pants material. I have a huge bulge down there when I am wearing this thing under those. And if I turn the torque up on it my penis is now pointing up sense my shortest is straight up. I look like I have a massive erection when I am wearing this thing under high pressure.

I really like the straps that it comes with. I have had no problem with Calixto's "head swell" with them. Did take some trial and error to get it. But now I know what needs to be done. I thought the foam pads were going to be a waste and I was planning on just throwing them out. I decided to give them a try and found that it makes the "head swell" easier to obtain and keep. I have yet to try the gauze to wrap anything with them, was planning on throwing that out also. Guess I had better give it a try to. I keep it on for about an hour at a medium tension then crank it up to max settings for about a half hour and my penis is telling me to please take it off. The burn is incredible it is throughout the entire top of the shaft. After I take it off I can't believe the hang I get, it must be at least a half inch longer probably more.

This will be my progress log of my journey to 8x6 non bone pressed. I will keep this thread updated on what I feel about the extender and what progress I am seeing or not. Feel free to ask questions, or if you would like a picture showing something about the extender let me know and I will see what I can do.

 

[calixto]

the case literally screams look at me.

HAHAHAHA

It is defiantly well built, I fell you could throw this in a river and pick it up a mile down stream and it would be just fine.

This is ESPECIALLY good news, from you sir, who I assume are a couyntry boy like myself and understand the wear we put on ALL things, especially what we get to get a big ass DING DONG. I am an Eagle Scout and "I done my share" of Rocky Mountain Camping.

I have seen some devices where guys would put there balls through also and then stretch. Not this one, there is no getting your balls through there. Plus it might help with turkey neck keeping your balls pressed against your body while your penis is being stretched.

Yes, I BET if you TRY you CAN get your balls through it, just put the balls through first, and it MIGHT be possible, Me and the good ole X4, well the X4 has a "notch" for your balls, so its WAY easier, but man I kinda like doing it this way every now and then, just feels different!

There is also no freaking way you are wearing this under clothes out in public.

No sh*t! I am not trying to be mean here, really I am not, but.........................have you SEEN what I write about?

I have a very loose pair of black shorts that are made out of sweat pants material. I have a huge bulge down there when I am wearing this thing under those. And if I turn the torque up on it my penis is now pointing up sense my shortest is straight up. I look like I have a massive erection when I am wearing this thing under high pressure.

Not in public, as you said!

I really like the straps that it comes with.

Really? Make a velcro strap, we ALL end up doing it, best tension EVER!!!

I have had no problem with Calixto's "head swell" with them.

Really?!!?! I wonder how good it would be with a homemade VELCRO strap?

I thought the foam pads were going to be a waste and I was planning on just throwing them out. I decided to give them a try and found that it makes the "head swell" easier to obtain and keep.

Wow, really?

I have yet to try the gauze to wrap anything with them, was planning on throwing that out also. Guess I had better give it a try to. I keep it on for about an hour at a medium tension then crank it up to max settings for about a half hour and my penis is telling me to please take it off. The burn is incredible it is throughout the entire top of the shaft. After I take it off I can't believe the hang I get, it must be at least a half inch longer probably more.

Ok, THIS is what I am talking about, DUDE!!! NEVER THROW ANYTHING AWAY!!! The gauze is GREAT,and even if you modify your system to meet your needs, NEVER throw ANYTHING AWAY!!!

This will be my progress log of my journey to 8x6 non bone pressed. I will keep this thread updated on what I feel about the extender and what progress I am seeing or not. Feel free to ask questions, or if you would like a picture showing something about the extender let me know and I will see what I can do.

GREAT JOB FLI-FISHER BROTHER!!! I look forward to you r results and progress (gains) that are OBVIOUSLY about to happen.

 

[calixto]

10 quotes from the same post in ONE post, man I set a record!!!

Now, WHERE IS FISCH TO SEE THIS!!!!

 

[calixto]

Calixto, check out how to put the X4 on in two separate pieces.

http://www.flickr.com/photos/treetopx4lpics/sets/72157621814231118/

Dude, Dangler bro, that didn't show me how to actually DO IT!?!?!?!?!

You CANNOT put it on like the penimaster or the Male Edge unless you take off ALOT of bars, which in turn, would give you, well,....sh*t for a stretch. Sorry man, just no way.

 

[Dangler]

Dude, Dangler bro, that didn't show me how to actually DO IT!?!?!?!?!

You CANNOT put it on like the penimaster or the Male Edge unless you take off ALOT of bars, which in turn, would give you, well,....sh*t for a stretch. Sorry man, just no way.

The user, Treetop, only unscrews the right & left rods.
He puts the base around his penis base.
He then straps himself in to the head piece.
He then attaches the rods by screwing them together.
Then he cranks up the tension.
Sorry that you were not able to see that.

And for you being a moderator, I think you could set a better example with your use of profanities.

 

[Fli-Fisher]

Here is better pictures... for some reason there is a size difference in what I have in photoshop and the website.

 

[Fli-Fisher]

Ohh you know Calix how we do it in the Rocky's.

Quick question for for people with an extender... The base of my penis is all red and starting to flake, is this normal???

 

[Insecure]

How tough is the plastic? Will it warp easily?

 

[ethan1066]

[FONT=&quot]Just had my new penis pump delivered. tried it for 4 hours today and it's great. was a little tighter than i expected, and had to have a few goes before i could get my knob in. But it soon loosened up...i hope i would managed to stretch it and its really a very natural process of penis enlargement...
[/FONT]

 

[Fli-Fisher]

How tough is the plastic? Will it warp easily?

By warp easily do you mean through everyday use??? I don't think it would warp from just using it. Now if you stuck it in the fire... That sh*t is going to warp. If you left it in the car on a hot summer day, I doubt it.

 

[Insecure]

By warp easily do you mean through everyday use??? I don't think it would warp from just using it. Now if you stuck it in the fire... That sh*t is going to warp. If you left it in the car on a hot summer day, I doubt it.

Yeah, I meant through every day use...getting more tempting to pick one up.

 

[Fli-Fisher]

So far I have liked mine. I think it will be a good extender.

There is one point of weakness in all extenders though. I think this extenders point of weakness is almost at the base of the rod it gets pretty small there. Of course I am just stretching my penis with it...

After reading sayians thread about Plastic deformation, and doing some research, I have changed the way I wear my extender. I use to just set the tension and leave it. Now, on the Male Edge extender you can see where the tension is at when you attach it on. It changes do to your penis stretching. So the tension you started with will be different when you end if you don't adjust anything during your stretch. I have now changed my session so that the tension will constantly be the same. I push the tension higher per se, but it really is the same. So what happens is there are 3 or 4 tension lines that tell you where the tension is set. I well set it at say line 3 and in about 15 minutes of wearing the tension is now moved to line 2 because of the stretch. I will then move it back to line 3 and repeat the process. I ended up about an inch longer than when I started using that method.

 

[calixto]

First to address Mr. Dangler: Yes, I "got" from the photos what the guy does to emulate the extenders that are INTENDED to be put on in a "2 part series". But all that looked like to me is a good way to break your X4 (expensive) extender, especially the threading on the rods.

Now, I really think we can handle some profanity. This is a PENIS forum, not an evangelical one, and I am a firm believer that we ALL should feel free to use some profanity when appropriate and never in excess.

On the other hand, I want to apologize for being offensive in my reply Dangler, I truly am sorry an when I read what I wrote I saw how it might have been easily seen as me being rude, and I certainly never intended to be. I do apologize, and want to say again that it never was intended to be that way.

You add A LOT to our forums Dangler, especially these "Devices" threads, and I will ALWAYS appreciate your input, and to be honest I AM intrigued that it IS possible to put the extender on that way, it just looks to me like it could be easy to break your extender while trying to line up the tiny threading of each rod, or when trying to spin the rod while it is inside the fragile cradle, I can see how BOTH could be easily damaged, and the X4 (which we both we have) is certainly not cheap, and the warranty I bet would not cover this, especially mine that is about to be 4 years old.

And again, I DO apologize for the earlier post, like I said, I really just appreciate you showing us that it is possible to put the extender on this was and I know that this was your objective. Hope all is well!

 

[fisch28]

Yeah Fli, I like what you said about adjusting the tension as the wear time increases, this totally makes sense. I've been doing this already without realizing the things you explained, thanks to Cal here who told me to give my bars 3-5 twists every 15 minutes or so.

 

[Retinoid]

I wonder if this would really complement a routine in which you do light stretches, jelq 200, v-jelq 60, edge for 10 mins, warm down and then put this extender on for the whole night (around 7+hours)?

 

[Retinoid]

Fli, btw...why did you go with the Pro instead of the regular? On their site it doesn't seem like they have much more in the Pro than the regular.

 

[Fli-Fisher]

I wonder if this would really complement a routine in which you do light stretches, jelq 200, v-jelq 60, edge for 10 mins, warm down and then put this extender on for the whole night (around 7+hours)?

I have actually noticed I get a better extender stretch and head swell after I do a session. So I have decided to at least do a mini session right before I put the sucker on. I would not recommend wearing this thing all night. If I have a good head swell and I keep adjusting the tension throughout the session, after about an hour to an hour and a half my head goes numb. You might rip the head of your dick off without any new blood in there for 7 hours.

Fli, btw...why did you go with the Pro instead of the regular? On their site it doesn't seem like they have much more in the Pro than the regular.

I went with the Pro because I like red and black a lot. That's the main reason, the other items it came with were just icing on the cake for me. Now after I have owned it I really like the foam tubes it comes with. They really allow you to crank the strap down without pinching your dick.

 

[Fli-Fisher]

So I have a question for you guys...

I woke up this morning and that cord that runs along the top of my penis is tender and sore, is that normal or did I push it a little to hard yesterday?