Homemade Extender

[JohnnyBlaze]

Has anyone tried making a homemade extender?

I found the link for one and it looks like it would do the job just as well as a pro extender

Advanced Homemade Penis Extender

Looks like you could make it with simple parts from home depot and for under 12 bucks!

 

[Big Al]

I remember Slimguy He always had great ideas for DIY PE.

If you have the inclination to build one, it would be a good idea to give it a try.

 

[sdman]

Ill give it a shot next week.

I have ZERO handyman skills, so we'll see how that goes.

 

[C.Phantasy]

Extenders with Noose type is bad voodoo,but hey at least it is cheaper than the ordinary ones

 

[gatodoabc]

I am trying to put this device together but I am having a hard time understanding the assembly. Has anyone made one of those yet? If so, can I see pictures of the device put together? The one by the link is really bad quality.

 

[Big Al]

Here's a good site on making your own extender: All About Penis Enlargement

UPDATED 24 July 2011: The link had to be changed due to it changing content- I've provided an internal link to similar data.

 

[juda]

Ill give it a shot next week.

I have ZERO handyman skills, so we'll see how that goes.

Same here but I plan on giving it a shot..I was thinking of purchasing some guides on how to make a better than what you'd buy extender :>

 

[gatodoabc]

Here's a good site on making your own extender: All About Penis Enlargement

The Slimguy's extender is the one I was trying to build, but if you read the instructions, it is quite confusing and many information are missing.

Also, the picture is so blurry you can't tell where to put what. My main problem is with the "metal spring" since it doesn't say if it is a compression or extension one. Also, the instructions are not clear as where to put them.

Any alternative solutions or better illustrative instructions anyone?

 

[calixto]

ok Juda, I have a question; Just where will you be acquiring these "guides"?

See, I have had my X4 labs extender (one of the most expensive, best rated ones on the market) and I have several ideas, but no real shop, tools, or skills to create what I envision, and I think with the right R&D (and funding to go with such of course) there would be a much better way to make a better extender.

I would love to share ideas and feel that using my extender in combination with PEGym-ing just adds to the "cementing" process. I am also restoring my foreskin and am interested in ALL things related to penile health and improvement, and it is amazing to see the devices that the Foreskin Restoration community has come up with in trying to be innovative and maximizing gains and time spent or efficiency of devices. I think we could do this with extenders because all these companies are pretty much selling the same product.

Let me know

 

[frb3]

Just bringing this back to the front.

 

[frb3]

Extenders with Noose type is bad voodoo,but hey at least it is cheaper than the ordinary ones

The basic design is there. Though a little convoluted, so it is probably in the neighborhood of an hour to assemble. Have most of the parts already for various other projects. Having said all that, will say all this: It should be semi easy to construct a collar type attachment with readily available Velcro. Otherwise with the noose, a good wrapping with 12-18" of self adhering Ace Bandage, should give you sufficient protection.

Don't know if you are a Cary Grant fan, but here is some banter from one of his movies:

You remind me of a man.
What man?
The man with the power.
What Power?
The power of VooDoo.
Who do?
You do.
I do what.
You remind me of a man.

 

[mwigw]

I have taken it upon myself to experiment with the extender design. So far I have progressed to a generation 5 of my design. I started out with a simple type of device that uses turnbuckles for tension to a fully enclosed spring design that is similar to the commercially available types. I have graduated from a gen 4 device with a total of up to 2.3kgs of spring tension to a gen 5 device with up to 4.8 kgs of spring tension. I am able to use the device comfortably for between 35 to 50 minutes before my glans gets fatigued. I call my devices generation 1(first) to generation 5(newest)

I have also experimented with the differences between noose and strap type glans hold down. I am quite satisfied with the noose type and have noticed no differences between the strap and noose other than the ease of attachment. I personally find the noose to be more comfortable(when properly attached). The noose material is 1/4 inch latex tubing. Pinching the delicate skin behind the glans seems to be common in noose design.

I will be willing to post an exact build specification of the generation 5 device that I have built. The build will require some specialized hand tools but should not be beyond the handy person to build. If requested I will post it here for the world to see... I just need a little time to write the instructions.

My stats at the beginning my PE journey in January 02 of 2009 were 5.75 inches non-BPEL and 4.75 EG I weighed in at 212 ponds at a height of 5'10 inches And I was 38 years old. Currently as of January 25, 2010 I am at 7.25BPEL (non-BPEL is just over 6.5 inches) and 5.3125 EG my current weight is 175 thanks to the P90X program, my height has not changed and I am now 1 year older. I have gained over .8 inches in length since using my generation 5 device and over 0.4 inches in girth ( I started weekly documentation in December of last year when I increased the spring tension.).

I am pleased with my growth and body transformation and want to share my techniques with those that are interested. Life is too short to be small...

 

[Future1]

.

 

[maelsukr]

Hey mwigw, I'm pretty handy, I'm an electrician. Post your instructions and I'll see what I can do. It has benefited you very well.

 

[mwigw]

The generation 5 device requires quite a bit of work , I took me about 10 hours to modify and get it right. I will be posting the instructions in a day or so once they are complete. I am also working on a power stretch generation 6 device that unfortunately cannot be worn discretely It places your unit in full erect position, but will have up to 10kgs of tension. I seem to have a ligament that resists stretching...

I have worked up to using these, When I first started with the 4.8kg I could only handle it for about 10 minutes at a time. I hate pain...

 

[freeway]

Let's keep this going - I too built a a device based on the slimguy plan but couldn't figure out where or why on some of the parts.
I ended up ditching the springs and substituted a double eye turnbuckle - I've been going for about a week - I'll post results but right now I'm interested in enhancing the design - I'll be happy to share my parts list and pics - I'm new here so not sure how to do some of this.
For what its worth - I'm not handy at all - so I'm very open to ideas on how to make this better.

 

[Stumpy]

I'd be interested to see this.

I've had a go at a few home-made extenders including a fairly discrete one using a single double eye turnbuckle.

But I'm not using any of them just yet ... I want to get better conditioned first.

 

[freeway]

---First Crude attempt at homemade extender----
This was the one i built about 3 weeks ago going roughly off of the slimguy model
As stated earlier I ditched the springs in the design

It cost about 10-15 dollars to build (probably 20-25 after all the new version parts I decided to test with)

I would like to build a better one - I must say this one is very combfortable (i'm sure not as good as store bought though) but with some tweaking I think it could be there
I can easily wear this for hours on end without any problems

Anyone requesting details feel free to post and I will try to answer
Also any improvement ideas are VERY welcome

 

[frb3]

I have taken it upon myself to experiment with the extender design. So far I have progressed to a generation 5 of my design. I started out with a simple type of device that uses turnbuckles for tension to a fully enclosed spring design that is similar to the commercially available types. I have graduated from a gen 4 device with a total of up to 2.3kgs of spring tension to a gen 5 device with up to 4.8 kgs of spring tension. I am able to use the device comfortably for between 35 to 50 minutes before my glans gets fatigued. I call my devices generation 1(first) to generation 5(newest)

I have also experimented with the differences between noose and strap type glans hold down. I am quite satisfied with the noose type and have noticed no differences between the strap and noose other than the ease of attachment. I personally find the noose to be more comfortable(when properly attached). The noose material is 1/4 inch latex tubing. Pinching the delicate skin behind the glans seems to be common in noose design.

I will be willing to post an exact build specification of the generation 5 device that I have built. The build will require some specialized hand tools but should not be beyond the handy person to build. If requested I will post it here for the world to see... I just need a little time to write the instructions.

My stats at the beginning my PE journey in January 02 of 2009 were 5.75 inches non-BPEL and 4.75 EG I weighed in at 212 ponds at a height of 5'10 inches And I was 38 years old. Currently as of January 25, 2010 I am at 7.25BPEL (non-BPEL is just over 6.5 inches) and 5.3125 EG my current weight is 175 thanks to the P90X program, my height has not changed and I am now 1 year older. I have gained over .8 inches in length since using my generation 5 device and over 0.4 inches in girth ( I started weekly documentation in December of last year when I increased the spring tension.).

I am pleased with my growth and body transformation and want to share my techniques with those that are interested. Life is too short to be small...

I am waiting for your design with baited breath.

 

[frb3]

Let's keep this going - I too built a a device based on the slimguy plan but couldn't figure out where or why on some of the parts.
I ended up ditching the springs and substituted a double eye turnbuckle - I've been going for about a week - I'll post results but right now I'm interested in enhancing the design - I'll be happy to share my parts list and pics - I'm new here so not sure how to do some of this.
For what its worth - I'm not handy at all - so I'm very open to ideas on how to make this better.

Looks to my untrained eye as if you have made a good compromise in your construction. Like you, I find the directions for the bottom half by Slimguy to be an incomprehensible mishmash. What is needed is a blow-up (sorry poor choice of words, shouldn't use 'blow' on this forum) of the photograph. Tried using my magnifying glass on the computer screen but still couldn't see how he attached the gate hooks, and springs to the bottom of the turnbuckle.