i do love clamping(cable clamps) but i want add some haning on my routine.so if anoyone have malehanger i want to ask him if you can use it like a clamp too.i hope you get my idea.i have low budget and i dont have the money to buy a thickerman too.if malehanger works like clamp too you can kill 2 birds with one stone.
male hanger question
- Thread starter wazedi2
- Start date
You may want to rephrase your question about the Malehanger and also include the Bibhanger hardcore, since they are virtually the same device. However, the Bibhanger is considered the original and imo looks more aesthetically appealing.
As for the Thickerman device, provided you apply a wrap to the base of your unit as per instructions, you will get a pretty good clamp going on. However, its nothing that the very inexpensive Cable Clamp won't accomplish. Also, the before and after photos on the TPD/MH website have been used on a few other enlargement product websites so...we don't actually know from which product those gains were actually achieved, if the photo is undoctored.
As for the Thickerman device, provided you apply a wrap to the base of your unit as per instructions, you will get a pretty good clamp going on. However, its nothing that the very inexpensive Cable Clamp won't accomplish. Also, the before and after photos on the TPD/MH website have been used on a few other enlargement product websites so...we don't actually know from which product those gains were actually achieved, if the photo is undoctored.
i know.but thats not what i ask for.i was asking because i want both products but i cant if i can use malehanger as a hanger(captain obvious) and as a clamp.cause their construction looks like a little
And I was saying it may have been better to say Bibhanger/Malehanger instead of just Malehanger since the Bibhanger is more well-known than the Malehanger and I'm also sure more people on here own a Bibhanger than a Malehanger. Therefore, by only saying "Malehanger" you may be missing out on responses from people who may own a Bibhanger and not know what the Malehanger is.
I'm also saying the TPD isn't exactly a worthwhile purchase if you're on a tight budget because you can produce the same (or better) results by just using a Cable Clamp (I've used both. Best clamp session has been with a Cable Clamp). Meaning, if you're choosing between the TPD and MH, you should just go with the MH since even if it doesn't work as a clamp, you still have the Cable Clamps to use.
- Joined
- Mar 18, 2011
- Messages
- 30,378
- Reaction score
- 3,416
- Points
- 133
- Location
- An inch and 1/2 deeper than before
The tad is a rip off. Buy a cable clamp for a dollar or two. Buy a bib hardcore and your set for both hanging and clamping.
I actually bought both the malehanger and hardcore. I originally bought the malehanger because it was cheaper until I found out how the owner ripped bib off through legal loopholes and then I saved up and bought the hardcore. I never let anyone know I bought the malehanger but I will now and give you my comparison.
One the advice that you will receive from SWM on fixing issues is subpar compared to the wealth of experience and knowledge you will get from bib. Bib answers questions everyday and only started making hangers because of members begging him to on thunders. SWM shoots for a one size fits all with his hanger and tells members to cut their wrap based on current measurements without adjusting the hanger this didn't work for me. There is a reason why he didn't want members to adjust the bottom hex nuts and I believe that it is because of the poor quality of his mold. The screws thread will actually rub off the mold around the hole. The mold isn't as durable as bibs. The holes aren't as clearly delineated like the bibs which has a clear oval shape but looks less defined and precise.
In place of bottom teeth the malehanger has a solid platform attached to the left side. In me I noticed this produces severe twisting to the left because my CS would rest on this at a 45 degree angle which would lower to straight after being fully tightened but the initial start is angles the penis. Even In the videos posted on the malehanger site you can see that SWM/malehanger/samswater/clampedlover/gayron twists in the hanger and to the left. I perceive this as a design flaw.
I did like that SWM provides videos on his hanger but I understand if bib doesn't want his penis on the web, still I wish he would hire someone to do it. I could never get the SS and what-a-grip combo to work for me some users have had good results with it. So far I've been doing best with HTW and theraband combo.
These are my observations so far. I'm still new to using traditional hangers. If you're still interested in the malehanger instead of giving SWM business I will sell mine to you or anyone else for $20.
Last edited:
